* IRONHOLE.M --  Yehle #13 9" smoothing plane
* Large hole at end of slot, sharp end to right,
* left end x=0, Y=0 is centerline of slot
* This program assumes you've roughed out most of the hole
* TOOL #6 is 3/8" diam. end mill for tool steel
Dim Abs
*this is awkward
* ==== Mount 3/8" end mill =======
Rapid      Z 0.1 Tool# 6
HolePock   XCenter 2.2074 YCenter 0 Diameter 0.63 ZDepth -0.2325 Cw StartHgt 0.1 RoughFeed 0.5 FinFeed 0.5
Rapid      Z 0.1
Rapid      Z 0.1 Tool# 0
* ===== various ways that don't work w/Anilam 1100 software 4.26a
*Rapid       X 2.3349 Y 0
*Now set tool depth for a comfortable amount of cut
*Dwell 0.0
* Anilam bug: this doesn't work
*Arc Cw      X 2.3058 Y 0.0792 Radius 0.1262 Feed 0.5
* another Anilam bug: this works better, but still doesn't
*Arc Cw     XCenter 2.2074 YCenter 0.0000 Angle 322.33 Feed 0.5
*Ah, "Angle" means "to which absolute angle" (not incremental)
*Arc Cw     XCenter 2.2074 YCenter 0.0000 Angle 37.6700 Feed 0.5
*Piecewise arcs--but this doesn't work either
*Arc Cw     XCenter 2.2074 YCenter 0 Angle 90 Feed 0.5
*Arc Cw     XCenter 2.2074 YCenter 0 Angle 90 Feed 0.5
*Arc Cw     XCenter 2.2074 YCenter 0 Angle 90 Feed 0.5
*Arc Cw     XCenter 2.2074 YCenter 0 Angle 90 Feed 0.5
EndMain
