* IRONTAPR.M --  Yehle #13 9" smoothing plane
* Two tapers at top of iron
* Can also be used on back iron
* This program cuts an oversize (2.015) width iron
* Sharp end to right, left end x=0
* Left end clear of vise by at least 2"
* Y=0 is centerline of iron
* Tool is 3/8" diam. end mill
Dim Abs
Rapid      X 1.75 Y 1.2265
Line       X -0.1 Y 0.7298 Feed 1
Rapid      X -0.2
Rapid      Y -0.7298
Rapid      X -0.1
Line       X 1.75 Y -1.2265
EndMain
