* travhar3.m - Yehle #13 9" smoothing plane
* harness for traveler, drilling/boring
* Stem end is down
* Part zero is: x,y = 0,0 on stem centerline
*  Z=-0.458 is flush with stem end
* Tool is 1/4 centercutting end mill w/min .39 long flutes
Rapid      Z 0.3
Rapid      X 0 Y 0
* bore/ream all the way through, .1875 diam
* (drill 13 is .185; then ream to .1875)
Dwell 0.0
* bore .26 diam flat-bottom
*  to Z=-0.112 (so that .1875 bore is .346 long)
Line       Z -0.112 Feed 1
Line       X 0.005 Feed 2
Arc Cw     X 0 Y -0.005 Radius 0.005
Arc Cw     X -0.005 Y 0 Radius 0.005
Arc Cw     X 0 Y 0.005 Radius 0.005
Arc Cw     X 0.005 Y 0 Radius 0.005
Rapid      Z 0.3
EndMain
