1963 Williams Jumpin Jack's original paperwork wanted. Partial sets considred.
Contact:
Bob
Posted: 2 October 2011
Bally ABC Bowler backglass wanted. Must be nice. Let me know what you have.
Contact:
Mike
Posted: 2 October 2011
Looking for a working Stern SD-100 Sound Board for a Nugent Pinball machine. Any help would be appreciated,
Contact:
Daren Reich
voice: 3365289367
781 Somerset Drive
Winston Salem, NC 27103
Posted: 2 October 2011
Needed Gottlieb "Stock Car" backglass
Contact:
Sam
Posted: 2 October 2011
Tales from the Crypt topper wanted. Must be nice.
Contact:
Mike
Posted: 2 October 2011
Wanted, good plastics for Williams Wing Ding, let me know what you have.
Contact:
John D Sulewski
voice: 716 372 7634
321 Fountain St.
Olean, NY 14760
Posted: 1 October 2011
1974 Chicago Coin, Hula Hula, lock down bar, New, Used, or repro ok
Contact:
Al Lafavor
voice: 706-95-8850
Posted: 30 September 2011
I am in need of the kicking horse for a 1965 Buckaroo. I have the stationary leg, and the spinning cowboy, just need the horse. I will even take one that is not attached to the shaft, as I have the shaft also.
Contact:
Andrew Sneed
Posted: 30 September 2011
I am looking for a 1959 Williams Door for a Pinch Hitter. It is probably the same door used on other Pitch and Bats from that era. Please email me if you have one available.
Contact:
Adam
Brick, NJ 08723
Posted: 30 September 2011
Need a Good playfield for a Bally "Bounty" bingo pinball. I have a great machine with a bad playfield. Does anyone out there have a NOS one available? Or know where i might find one. Playfield can be bare without wiring or complete with wiring.
Contact:
Gary Conway
Silverdale, WA 98383
Posted: 30 September 2011
The BG on my 1965 Williams Lucky Strike is cracked through and through. Looking for another one. Contact me via email.
Contact:
Kevin Ryan
Somewhere
Out There, CO 90210
Posted: 30 September 2011
Williams Cyclone Blue Light Dome wanted for the upper right hand corner of the playfield. If you have hand please let me know what you will sell it for.
Contact:
Randy Galati
voice: 6182350179
205 St. Sabre
Swansea, Illinois 62226
Posted: 29 September 2011
WTB HI RES BALLY BACKGLASS SCAN
Just to liven up the gamesroom. need a high quality scan in any format. will be printing out approx double size. just wondered if anyone had scanned a backglass for a project / repro job. wish list in order would be WIZARD, FIREBALL, SUPERSONIC, KINGS OF STEEL but would consider any Bally 77 to 84
Contact:
Steve Page
Birmingham UK
Posted: 29 September 2011
Gottlieb Hearts and Spades Backglass. Looking for a good glass. Send pictures and price to z3bomb@yahoo.com.
Contact:
Colin Dowling
voice: 972-795-7674
5040 Ashlock Drive
The Colony, Texas USA
Posted: 28 September 2011
Pinbot Topper Wanted
Looking for a Pinbot Topper in nice condition. Could just be the top portion, I don't need the flasher assembly, etc however if you have a complete topper I'd be interested in that too.
Contact:
Wayne
Pennsylvania
Posted: 27 September 2011
Wanted: Gameplan Coney Island backglass.
Contact:
G Starr
Posted: 27 September 2011
Wanted: My 10 year old nephew (Robby) was diagnosed with non Hodgkin Lymphoma (cancer) in July and he has wanted a pinball machine for some time. Would anyone be willing to donate a pinball machine to him? If I had the funds I would buy it myself but any extra money I have I give to my sister to help with the extra bills they have. We live in Canada (Ottawa area. Would really put a smile on his face.
Contact:
Deedee
voice: 8196829106
87 Patrimoine
Gatineau, Quebec J9h 3p5
Posted: 27 September 2011
Looking for these NOS instruction cards:
World Fair, Egg Head, Capt Fantastic, Sky Jump, Fireball, Capersville, Jungle Queen, Pleasure Isle, Hot Shot, Magnotron, Love Bug and Spanish Eyes
Contact:
Tony Mather
Posted: 26 September 2011
Wanted to buy:
1952 United Super Shuffle Alley puck bowler parts. Looking for replacement pins and pin attachment wires. These are the 6" pins with red numbers on them, and not the 10" ones. They are attached by a wire assembly to the drive. Ideally need a #3 pin and a #8 pin, but will entertain any replacements.
Contact:
Mark Yocum
St Louis, MO
Posted: 25 September 2011
Looking for a cabinet (body and head) for Williams reverse wedge head game...any title, doesn't matter, so long as the cabinet is solid and the original paint is intact and presentable. Will buy whole game with trashed playfield, bad backglass or no backglass at all if the cabinet is excellent.
Contact:
Joe
Posted: 24 September 2011
1969 Chicago Coin Moon Shot backglass. Also looking for coils of any sort and finger switches, or the contact switches behind the bumpers. Also looking for graphic art for the box unit it self, not the playing field.
Contact:
David Mccarnan
Posted: 23 September 2011
I am looking for a back glass for a 1967 Chicago Coin Bull's Eye Pitch and Bat machine. If you have one for sale, please send picture and price to dirthobo00@yahoo.com
Contact:
Danny
2930 Winthrop Road
Terre Haute, Indiana 47802
Posted: 23 September 2011
Looking for a Black Spiderman, I have a Red Spiderman I could trade plus cash, or a POTC huo plus cash, or could pay cash.
Contact:
Brandon
Posted: 22 September 2011
Wanted a Data East 128x16 dot matrix display complete email me with any find and must take paypal
Contact:
Paul
Posted: 21 September 2011
Looing for CPU for WICO pinball "AF-TOR" or someone who can repair mine.
Contact:
Joe
fax: 402-403-1518
803 W. Mission Ave
Bellevue, NE 68005
Posted: 21 September 2011
I am looking for a R2D2 body and a death star dome for a Data East pinball. I have been unable to find any reproductions for sale currently and do not know the name of the company that was making them.
Contact:
Mike Williams
3733 Cholla Dr
Lake Havasu City, AZ 86406
Posted: 20 September 2011
1946 Chicago coin Goalee backbox and hardware. I have a backglass ready to put in. Mirror assembly preferred but not needed. Anyone know where I can get this.
Contact:
Len
voice: 5162443630
NY 11507
Posted: 19 September 2011
1993 Bally Judge Dredd Translite Wanted - mint or near mint. My current translite is full of holes. Wanting to shop the game and to get it back to as near new condition as possible. My current translite is killing me!!!!
Contact:
Andrew
Alberta Canada
Posted: 18 September 2011
Chicago Coin Bat Unit
Looking for a bat unit for my 75 Chi Coin Big League, though any bat unit from the mid-60s on would work.
Contact:
Patrick Shanahan
Chicago, IL
Posted: 17 September 2011
Wanted Stern Striker Extreme CPU/Sound Board & Dot Matrix Power Supply Board
Contact:
Wayne
Posted: 16 September 2011
1958-1960 Bally Skill Roll: Need 3 undamaged handles/knobs, preferably still on the shaft, undamaged springs, coil for the tilt relay, and the decal that should be at the center of the bottom frame board. FYI, I have the spline tool to remove a knob from the shaft and all of the relay coils are the same, so any of the coils will work.
Contact:
Michael Roerig
voice: 651-785-6293
5510 Feather Court
White Bear, MN 55110
Posted: 14 September 2011
Gottlieb Wildlife/Jungle: looking for a NOS spinner or even the art on file so I can print out.
Also after left slingshot plastic for this game
Contact:
Tony Mather
Posted: 14 September 2011
Looking for the backglass for a Bally Moon Raider, and a Chicago Coin Pistol (this game has an upper and a lower).
Contact:
Paul
voice: 262-835-2892
Posted: 14 September 2011
Williams Smarty sligshot plastics and ball count wiping finger.
Contact:
John Jones
Australia
Posted: 13 September 2011
Williams Swing Time plastics, lock bar release lever, ball push up rod with the original knoeb intact(mine is missing)
Contact:
John Jones
Posted: 13 September 2011
1987 Williams "Fire!" Any playfield game specific parts. Any Champagne Edition specific parts (rotating "flame wheels in backbox) any items considered
Contact:
Mark Montgomery
Posted: 12 September 2011
Looking 1948 Genco Merry Widow backglass. Call Tony 330 503 5539
Contact:
Tony Torisk
voice: 3305035539
392 Spring St
Struthers, OH 44471
Posted: 12 September 2011
1966 Williams 8 Ball pop bumper yokes "slotted bar" and associated fiber wafers wanted.
Also looking for any plastics for the pin in good condition.
Contact:
Gary
voice: 610--357-5457
Posted: 11 September 2011
1978 Nugent backglass wanted! Must be mint condition will pay top dollar!
Contact:
Grant Robbie
Perth, WA Australia
Posted: 9 September 2011
Looking for one ramp for Gottlieb Hollywood Heat (Red).
Please email for respond.
Contact:
Daniel Saillant
voice: 418-827-8418
6 Fillion Street
St-joachim DE Montmorency, Quebec Canada
Posted: 9 September 2011
Looking for Pinbot and F-14 Tomcat transtile (backglass) used or new, also looking for a speaker display panel for F-14, this holds the speakers and displays. Also looking for a scaped out High Speed I need the complete head, but will take what I can get.
Contact:
DC Amusements Inc
voice: 905-939-9144
Toronto Gta, Ont Canada
Posted: 9 September 2011
Looking for 1 or 2 cream colored Bee Hive style light up posts for a Gottlieb Sittin' Pretty, Sitting Pretty. The posts are located on the playfield in the left and right corners just above the apron. These posts can also be found just below the slingshot plastics on a Gottlieb Gondolier, and also between the flippers and apron on a Gottlieb World Champ. If you are not sure, please email me and I will send you a picture of the posts I need.
Contact:
Mark Radl
voice: 920-629-3517
Manitowoc, WI 54220
Posted: 8 September 2011
Looking for a preferably decent backglass for a Williams Pit Stop but am interested in all conditions because I have nothing right now. Let me know what you have.
Contact:
Mark Radl
voice: 920-629-3517
Manitowoc, WI 54220
Posted: 8 September 2011
Seeking the manual for a 1967 Williams Shangri-La.
Contact:
Glen Peters
voice: (714) 745-1783
So. CA.
Posted: 8 September 2011
I'm looking for playfield parts for a 1995 Sega Apollo 13, specifically moon and rocket plastics.
Contact:
Bill
NY
Posted: 7 September 2011
Backglass for a Williams Post Time. Does not need to be perfect.
Contact:
David Anderson
voice: 9206092875
5515 County Road Pp
DE Pere, WI 54115
Posted: 6 September 2011
Looking for NBA Fastbreak blue dome cover for upper right hand corner
Contact:
Randy Galati
voice: 618-235-0179
205 St. Sabre
Swansea, Illinois 62226
Posted: 6 September 2011
Looking for a back glass/translite for a Williams PINBOT
Must be in nice condition.
Contact:
Tim Carroll
voice: 306 652-0771
Posted: 3 September 2011
I am looking for a backglass for a Williams Stardust to replace one that is in pieces.
Contact:
Greg Kemnitz
Loretto, MN 55357
Posted: 2 September 2011
Looking for a lower cabinet
for a 1966 Williams pinball
North Texas area, I cannot aford to pay shipping
Any 1966 cabinet will do.
does not need good paint, as it will be repainted anyway.
Condition needs to be good
Cell 817-996-9344
Contact:
Rod
Coppell, TX
Posted: 2 September 2011
Looking for the gate for the upper playfield of a 1971 bally skyrocket. Gate releases on hitting of a target.
Contact:
Justin Evans
Montreal, Quebec
Posted: 2 September 2011
Wanted - Backglass for a Chicago Coin Gold Record pinball machine. Broke mine and in of replacement.
Gary
440-376-3509
Contact:
Gary Patterson
Posted: 2 September 2011
Looking for an F-14 playfield in nice condition. Populated would be great, but also would be interested in unpopulated.
Contact:
Wayne
Pennsylvania USA
Posted: 1 September 2011
Looking for the original TV version of the Bally Star Trek pinball backglass. This is the one with red uniforms, not grey. Open to quality, so let me know what you have. Just need the backglass, but can discuss the whole machine if you have.
Contact:
Aaron
Chicago, IL
Posted: 30 August 2011
I have 1974 Gottlieb "Big Indian" machine that I would like to find a good back glass for. Mine is flaking bad.
Contact:
Jay Rockwell
voice: 505-400-8435
1381 Cale Cielo Vista
Bernalillo, NM 87004
Posted: 29 August 2011
I'm after plastics and a backglass for a Gottlieb Aquarius (1970).
Contact:
Mark
Posted: 29 August 2011
Wanted parts for a Gottlieb Vegas
Contact:
Joe
2795 Hessel
Rochester Hills, MI 48307
Posted: 29 August 2011
Wanted flipper assemblies for a custom pin. I need both a right and left for the lower playfield and then a second left side assembly for the mid-playfield shot. The most important part I need is the mounting plate, but fully complete (coil, links, stop, etc) and something that was working at one time and maybe comes from a parted machine is preferred. SS era or newer. While I'd like 3 in one shot, if you have only the lower pair I'm still interested. I could also use a pair of slingshots.
Contact:
Stephen
Cranford, NJ
Posted: 27 August 2011
I am in Need of a back glass for a Gottlieb 'Royal Flush' 1976. 4 person playing filed.
Contact:
Dave Miles Sr.
voice: 757-472-6953
105 Glen CT.
Chesapeake, VA. 23325
Posted: 26 August 2011
I am looking for the red Spinout piece that goes with Taxi by Williams. I need the entire peice, not just the decaled bits on the top; my game has a cracked assembly which causes the ball to slow down as the cracks dampen the rotatrion of the ball in the spinout. Please contact me if you have such a piece for sale, or know of someone who does.
Contact:
Rob Donner
Long Island City, NY 11109
Posted: 26 August 2011
Looking for a nice Niagara backglass.
Contact:
Rob
Posted: 26 August 2011
Wanted 1974 Bally Boomerang Backglass in at least good condition.
Contact:
Chuck
Fort Wayne, In
Posted: 26 August 2011
1957 Chicago Coin Bowling League head
Looking for a head to a 1957 Chicago Coin Bowling League (bowler) for parts.
Contact:
Carey
voice: 281-723-0232
Houston
Posted: 25 August 2011
I am the original owner of a 1980 Brunswick "Aspen" pinball machine that needs someone to repair or replace the original board that comes on but will not come alive.
Contact:
Michael Bright
voice: 770-251-6598
329 Jim Starr Rd.
Newnan, GA. 30263
Posted: 23 August 2011
Looking for a backglass for a Bally Night Rider EM. Mine is broke, so I will looking for a backglass in any condition.
Send me pictures of the front and back of the backglass plus what you were looking to get for it, including shipping.
Contact:
Dave Campbell
voice: 440-454-9672
27344 Watkin Road
Olmsted Township, OH 44138
Posted: 23 August 2011
Need lower apron for Gottlieb Pro Pool. Needs to be nice but perfect not required. Needs to have the credit indicator hole on the left side. Also need a set of drop targets for Pro Pool/Big Shot/Hot Shot. Used are ok if in good condition.
Contact:
Dave
Indianapolis, In
Posted: 23 August 2011
Wanted- 1970's Bally 4 player back door (cover). Must be in decent condition. Lock is optional.
Please email pics and price.
Contact:
Marty
CA
Posted: 23 August 2011
Williams Taxi Spin Out ramp, and Plastic above Mariyln pickup cheaper than usual sources. Spin Out ramp has to be complete and not broken or missing any pieces.
Contact:
Rob Mocca
106 Wildwood CT
Saint Charles, Missouri USA
Posted: 23 August 2011
Looking for Dr Dude parts:
1. Ramp
2. Plastics
Contact:
Larry
Kichener, Canada
Posted: 22 August 2011
1976 Gottlieb Solar City playfield plastics - must be nice -- contact Wes Dolen 239-643-1100
Contact:
Wes Dolen
voice: 239-643-1100
2066 50th Terr SW
Naples, Florida 34116
Posted: 20 August 2011
Bally 1979 Star Trek - need back glass in good to excellent condition.
Contact:
Bob Lund
voice: 712-255-5474
Sioux City, Iowa 51101
Posted: 20 August 2011
Wanted-1974 Bally Wizard must be complete & in perfect working order.will pay afir price. North jersey area please.
Contact:
David Cosoi
fax: 973-427-7304
1050 Goffle Rd
Hawthorne, New Jersey USA
Posted: 20 August 2011
Wanted.1975 capt.fantastic, must be in perfect working order and complete.will pay fair price, north jersey area.
Contact:
David Cosoi
fax: 973-427-7304
1050 Goffle Rd
Hawthorne, New Jersey USA
Posted: 20 August 2011
Wanted
1978 Bally Lost World Headboard and Playfield Cabinet
prefer good condition.
Contact:
Greg Hornbacher
voice: 701-471-5012
4201 Montreal St. #206
Bismarck, ND 58503
Posted: 20 August 2011
1990 Williams Whirlwind plastics
looking for the plastics parts on both sides of right ramp. (2 total) these are the last 2 pieces I need to complete this project. will buy a complete set if I need to.
Contact:
Tom Kerin
New Baltimore, MI 48047
Posted: 19 August 2011
I want to buy back glass for 1978 Williams Disco Fever. Is there somebody that makes reproduction back glass for disco fever?
Contact:
Scott Walters
voice: 918 695 4722
16381 S Cedarcrest Dr.
Claremore, OK. 74017
Posted: 19 August 2011
wanted Bally Mousin Around playfield
plastics not needed
Contact:
Chuck
voice: 401-569-2010
14 Teakwood Dr
Johnston, RI 02919
Posted: 19 August 2011
WTB: Diverter Shaft Sub-Assembly P/N 515-5418-00 for a Data East Hook. I have the shaft, just need the diverter gate P/N 535-6082-00 or the specs to recreate it.
Contact:
Glenn
IL
Posted: 19 August 2011
Looking for a GOOD Chicago Coin 1940 SPORTY BG
Contact:
Rob Hawkins
voice: 310 703 4843
3568 Inglewood Blvd.
Los Angeles, CA 90066 - 2850
Posted: 18 August 2011
Dungeons And Dragons plastic set.
Contact:
Jocelyn
Quebec Canada
Posted: 17 August 2011
Looking for Bally On-Beam BAckglass
Contact:
Mark Anderson
voice: 612-802-2454
2453 Cohansey St
Roseville, MN 55113
Posted: 17 August 2011
Williams TAXI I need bell clapper for bell assembly part #B-8462 description Armature assy also need dome light pcb assembly part # 5768-12329-00 its for the back box taxi light thanks for your help please call 510 501 9888 J.R help me complete my game
Contact:
Jaime Ramirez
voice: 510 501 9888
4806 Davenport Ave
Oakland, CA 94619
Posted: 17 August 2011
1950 Gottlieb Spot Bowler Want plastic pins on the playfield
Contact:
Jack
Cincinnati, Ohio 45140 USA
Posted: 15 August 2011
1970 Williams Dipsy Doodle Backglass. Looking for a nice one. Mine is cracked.
1975 Gottlieb Top Score Backglass. Something would be better than nothing at all.
Contact:
Scott Sheridan
voice: 419-893-4263
1374 Conant St.
Maumee`, OH 43537
Posted: 14 August 2011
I need plastic set for the Williams 1961 game called Reserve.
Contact:
Patrick Roach
17335 Wayland Run
San Antonio, Texas USA
Posted: 12 August 2011
Looking for one set of three Williams drop targets. Also looking for all four boards for a Willams System 6. Also looking for a Laser ball Laserball Backglass. Also looking for master display and the four single displays for a williams system 6 machine.
Contact:
Mark Anderson
voice: 612-802-2454
2453 Cohansey St
Roseville, MN 55113-3507
Posted: 12 August 2011
Bally kiss back glass.
Contact:
Jim Fager
voice: 9375598675
4807 Loxley Drive
Dayton, Ohio 45439
Posted: 11 August 2011
looking for an Eight Ball Deluxe playfield, either NOS or CPR repro
Contact:
Gary Belcaster
Posted: 11 August 2011
Gottlieb Pleasure Isle - after original instruction card
Contact:
Tony Mather
Posted: 9 August 2011
I need the upper left playfield plastic for a 1964 Gottlieb Bowling Queen or even better if you have a complete set for sale let me know.....
Contact:
Larry Wolfe
Saint Albans, WV
Posted: 8 August 2011
Looking for firepower parts that are in good condition. Please let me know what you have.
Contact:
Paul
Posted: 8 August 2011
Bally 1994 Shadow Pinball complete playfield plastic set wanted in nos or good condition. Please email with pictures and asking price.
Contact:
Dave
voice: 213-392-4324
Long Bach, CA 90806
Posted: 7 August 2011
I am looking for any information on Rock Ola's Standard Shuffleboard. I need any manuals, schem's, anything on this item. I need stickers to go back on the coin box and scoreboard when done.
Contact:
Steve Campbell
voice: 405.217. 8774
Norman, OK 73069
Posted: 7 August 2011
I am looking for the 2 middle side plastics for a 1963 keeney pinball called poker face. Please let me know if you have any other parts for this machine.
Contact:
Fred
New Jersey
Posted: 6 August 2011
Looking for 2 Williams system 11 - 7 diget displays for a comet.
Contact:
Matt Horn
Posted: 6 August 2011
Nugent backglass.
Looking for glass in very good condition.
I might also be able to redo what I have with a high resolution e-photo of a mint Nugent backglass.
Contact:
Nate Oakes
303 Seneca Rd,. Ste 102
Hornell, NY 14843
Posted: 6 August 2011
Needed lockdown bar (end cill) needed for Bally Bikini or Lido.
Contact:
Gary
Silverdale, WA
Posted: 5 August 2011
Looking for back glass for Williams Space Mission.
Contact:
Larry Phillips
5145 S.E. Hunter CT.
Milwaukie, Oregon 97222-4534
Posted: 3 August 2011
Looking for nice condition PF plastics sets for Gottlieb Trio and Gottlieb Poker Face. Can buy outright or trade. Would be interested in nice scans of these plastics as well, in case no plastics are available, as my plastic sets are Bacon.
Contact:
Alex
CT
Posted: 3 August 2011
Looking for nice condition Backglasses for the following woodrails:
Williams: Rocket
Gottlieb : Alice in Wonderland
Also interested in all game specific assemblies and parts for these games.
Contact:
Alex
CT
Posted: 1 August 2011
Looking for diamond shaped caps and single when lit deco caps.
Contact:
Monte Carpatus
Posted: 31 July 2011
I recently bought a 1992 DE Star Trek 25th Anniversary I am needing multiple random parts, the turbo boost kicker assy, underplayfield ball track and the launch button and housing. I am needing a bunch of random parts please let me know what you have.
Contact:
Ken
voice: 702-278-9888
Las Vegas, Nevada 89115
Posted: 30 July 2011
Looking for a Twilight Zone Pinball Airliner Mod w/4LED's. Have seen a couple lately w/wing LED's only. The one I am looking for has 2 wing, tail, and cabin lights. Will pay top dollar.
Contact:
David Budrus
1715 Carolina St.
Middletown, Ohio 45044
Posted: 30 July 2011
Need one Monday Night Football Main Center Ramp. Please help if you can.
Contact:
Ron
Bloomfield, CT 06002
Posted: 30 July 2011
1963 Midway Raceway Playfield I need a playfield complete or missing a few parts as long as the playfield condition is good.
Contact:
Blaine Yarber
voice: 276-608-0888
15433 Briarwood Lane
Abingdon, VA 24210
Posted: 28 July 2011
Blackbelt/Karate Fight- and a Tradewinds backglass
Contact:
Chuck Shade
voice: 5703238201
Williamsport, PA 17702
Posted: 26 July 2011
Earthshaker Zone Opener Assembly Needed. Please let me know!
Contact:
Hunter Mackintosh
voice: (972)740-2453
570 Mercer
Grand Prairie, TX 75052
Posted: 26 July 2011
Sega EM Manuals:
Looking for the following SEGA EM manuals. Would also be interested in any other paperwork (invoices, service bulletins, flyers, etc.) for the SEGA EM games (1966-1976)
Sega Dodgem Crazy manual
Sega Derby Day manual
Sega Five StarQ manual
Sega Jumbo manual
Sega Invaders manual
Sega Jockey Club manual
Sega Ascot manual
Any other other Sega EM service bulletins, old invoices, etc
Contact:
Derek
Posted: 26 July 2011
Sega Motochamp Parts:
Searching for the following parts for a 1973 Sega Motochamp EM arcade game.
Small amplifier board on the original 8 track player.
Part Number (GN-4604) Also fits Sega Grand National.
Complete Drum/Projector unit which projects road lines onto the
playfield. Part Number(MT-1100)
Also interested in any sound/amplifer cards from other Sega EM games.
Contact:
Derek
Posted: 26 July 2011
Gottlieb NOS plastic sets wanted
hello I am looking for Nos Gottlieb plastic sets
especially the sets who are not available any more by steve young
Hulk, Countdown, Pink panther, Spirit, Caveman, Devils Dare, Asteroid Annie, and more
please send me a mail with the set or sets you are selling and price to my mail
I can pay with paypal or other if needed.
Contact:
Michael Platje
12400 France
Posted: 25 July 2011
Could use a decent 1967 Williams Beat Time backglass. Perhaps you bought a new one but your old one is decent? Or maybe you have one of the repro "Beatles" version you are not using? If so, please let me know.
Contact:
Clay
voice: 248-390-5382
Northville, MI 48167
Posted: 24 July 2011
I am looking for play feild plastics for a 1979 roller disco
Contact:
Scott
Goshen, NY
Posted: 24 July 2011
Looking for a Space Invaders playfield overlay.
Contact:
Joby Mongan
voice: 1-509-863-2284
Posted: 24 July 2011
I need ASAP the plumger and ball raiser parts from and Gottlieb wooden rail or 5-ball game from the early 60's. Will pay good $.
Contact:
Ron Scelfo
Posted: 23 July 2011
Looking for any parts for Sega Jurassic Park Lost World and Data East Batman.
I'm looking to restore both of these games. Please let me know if you have any parts to these machines. Looking for everything boards, play field plastics and cabinet parts.
Contact:
Nick
Easton, PA
Posted: 23 July 2011
Looking for Space Invaders Playfield Overlay.
Contact:
Sergio
voice: 55-4499166968
Av Parana, 5396
Umuarama, Pr, Parana Brazil
Posted: 23 July 2011
Looking for a set of pinball legs for an Atari Superman vintage. Legs don't have to be off a Superman game, but need that style for my restoration project. Condition not as important as the correct style and that they are straight.
Contact:
Mike Milligan
San Jose, CA
Posted: 22 July 2011
1975 Chicago Coin "Big League" Bat Unit
I'm in need of the bat unit for a 75 Big League. This is the SS model but the EM version from 73 (Baseball Champ) will work as well.
Contact:
Patrick Shanahan
Posted: 21 July 2011
Need a back door for late 70's Gottlieb 4 player like Cleopatra or Jungle Queen...27 3-4" wide x 28 3-4" high.
Contact:
Joe Grenuk
Posted: 21 July 2011
I am looking for the following plastics:
1) GTB 'Stargate' : bottom right slingshot plastic
2) GTB 'Victory': left & right slingshot plastics
3) BALLY 'Mousin Around': plastic atop the U-turn above the center 1-2-3 target bank.
Contact:
Pascal Janin
Tullins France
Posted: 20 July 2011
I am looking to buy several metal coin box lids for early Bally solid state machines. I just need the lids.
Contact:
Kevin
Posted: 20 July 2011
I'm looking for a NOS middle ramp for my Attack from Mars.
If you have one, please contact me.
Contact:
Thierry Lecomte
Posted: 20 July 2011
Gameplan Lady Sharpshooter populated played in good condition
Contact:
James Adams
Posted: 19 July 2011
Sharpshooter II populated playfield in good condition
Contact:
James Adams
Posted: 19 July 2011
1953 Gottlieb Shindig playfield plastics. I have contacted Pinball Rescue in Australia to request they reproduce these plastics. I was informed that I was #2 on the want list. I have since contacted 4 people I know need these plastics. If you are in need of SHINDIG plastics, or know of another collector that may need them, PLEASE pass this information along to them, as it takes 10 requests before the men down under will consider producing them.
Contact:
Dave Sorensen
voice: 262 652 3657
5634-46th Avenue
Kenosha, WI. 53144
Posted: 18 July 2011
Lookin for a nice 1966 williams full house playfield. Mine is trashed, left in sun. Anybody near Dallas have one for sale? Cheap?
If I cant find a playfield, I will need to sell the pin
Contact:
Rod
Dallas
Posted: 18 July 2011
1990 Data East Simpsons Green Wire Frame ramp
Contact:
John D.
8174 Meadowlark Court
Newark, CA 94560
Posted: 17 July 2011
I am looking for a NOS ROLLERGAMES Playfield. I can pay cash or I have over 200 playfields to trade. Let me know if you can help
Contact:
Ron Kruzman
MI
Posted: 16 July 2011
I need the color code of the paint that was used on a 1959 Lightning Ball pinball machine. The colors are orange, blue/gray and yellow.
Contact:
Larry Bordeaux
Posted: 16 July 2011
I am looking for the light cover that goes over the drop targets on Gottlieb's Big Indian 1974 pinball machine. It has 5 Indians going across it. I have replaced all the other pieces but cannot find this one except in a full kit.
Contact:
Scott Kintner
voice: 5736191836
513 Hutton Ln
Jefferson City, MO 65101
Posted: 15 July 2011
Looking for a Replay unit "gear" to a Gottlieb EM.
Bringing an 1971 "2001" back to life!
Gears were standard on many Gottlieb EM's, so if replay unit is broken but gear looks ok, it would be ok... I only need a gear.
Contact:
Kolby
voice: 303-946-3482
Castle Rock, CO
Posted: 15 July 2011
Maverick fully populated playfield in nice shape.
Contact:
James Adams
Posted: 15 July 2011
Looking for a backglass for each one of the following games:
1972 Williams Fan-Tas-Tic
1973 Bally Amigo
1973 Bally Circus
1975 Bow n Arrow (EM)
1977 Hot Tip (SS) (Only if really nice)
Please email with pic and price .
Contact:
Tim
Sterling Heights, MI
Posted: 14 July 2011
1991 Data East Batman coin door wiring harness.
Contact:
E D Kuebler
Posted: 13 July 2011
I am looking for the Supercharger Ramp Sign for High Speed II - The Getaway. I think the part # is A-15456-6 #555
I am also looking for a new ramp lifting mechanism (part # B-12576)
Contact:
John Dellaport
voice: 720-256-5662
Posted: 12 July 2011
Looking for any and ALL back issues of the PinGame Journal. I am looking for those starting during the first few months of 2010 and going back as far as you have.
Contact:
Steve Campbell
Posted: 12 July 2011
Looking for the back glass for two EM machines both are Chicago Coin
Gold Record 1975 4 player Chicago Coin
Blue Max 1975 4 player Chicago Coin
Thanks for your help Bill Corteville
Billiard & Games
527 E. Harry St.
Wichita, KS. 67211
316-267-4477
Contact:
Bill Corteville
voice: 316-267-4477, fax: 316-267-5319
527 E. Harry St.
Wichita, KS 67211
Posted: 12 July 2011
1992 DE Star Wars and Williams Fish Tales parts needed
I need a R2-D2 unit as well as a set of plastics for the Star Wars
R2-D2 doesnt need to be perfect!
I am in need of a WPC 89 sound card for the Fish Tales as well as the reel/ball shooter, and possibly a playfield
any help would be greatly appreciated!
Contact:
Darren
voice: 210 237 3056
San Antonio, TX
Posted: 11 July 2011
Wanted: 1967 Williams Apollo Backglass -- New or repro is fine, must be nice, doesn't have to be mint.
Contact:
Brett Gens
voice: 612-221-1863
Winsted, MN 55395
Posted: 11 July 2011
Looking for the playfield plastics for Gottlieb 1971 play ball.
Call 505-720-0706
Contact:
Danny Nieto
voice: 505-720-0706
6658 Elwood Dr NW
Albuquerque, New Mexico 87107
Posted: 10 July 2011
I'm looking for a good condition back glass for a Gottlieb® 1979 Incredible hulk pinball machine.
Contact:
Jon Mead
London, Ontario Canada
Posted: 9 July 2011
Wanted: Kiss pinball machines, whole or parts. Backglass, Cabinets, and Playfields.
Located NW of Chicago IL.
Contact:
Jack
Posted: 9 July 2011
playfield for Bugs Bunny Birthday Ball wanted. Also looney tunes plastics. Must be good.
Contact:
Simon Barker
Garden Lane
Notts UK
Posted: 8 July 2011
Williams Touchdown Backglass Needed. (U.S. Only) If you have a decent one, does not have to be perfect, please contact me with Asking Price, And Location. Would be great to find one in Ohio.
Contact:
Tom
Ohio
Posted: 6 July 2011
Looking for Ship Upgrade for my Star Trek Next Generation.
Need Following
Romulan Warbird . Prefer one with LEDs in it
Upgrade Bird of Prey. I Have old Generic one.
USS ENTERPRISE NCC 1701D that Lights up. Goes Next to Bird of Prey
Shuttle that goes over Beta Quadrant Ramp
Contact:
Mike
OH 44134
Posted: 4 July 2011
1982 Devil's Dare parts needed
I bought what was left of a parted out Devil's Dare. The playfield is in decent shape so I hated to see it junked. I need a full plastic set and bumper caps. Also need a sound/speech board and CPU board with ROMS.
Contact:
Billy Muth
voice: 757-577-4343
Portsmouth, VA 23703
Posted: 3 July 2011
Wanted: Parts for 1941 Scientific Batting Practice. Some backbox assemblies missing. Close up detailed pics of an original or restored complete working machine a big +. Also need schematic.
Contact:
Michael Scott
voice: (702)378-4678
Las Vegas, NV
Posted: 3 July 2011
I am looking for a empty head cabinet for a Williams single player machine from the 60's era. I need it for my Heat Wave machine. I can repaint. I just need the wood to be in good condition.
Contact:
Gary Hargrove
voice: 405-619-9673
2808 Linda Lane
Del City, OK 73115
Posted: 2 July 2011
I am looking for a late 70's Bally backglass lift bracket (i.e., the bracket that fits on the bottom of a backglass.
Contact:
Jean
Posted: 1 July 2011
I am looking for a set of 4 black mid 70's Bally legs in good condition.
Contact:
Jean
Posted: 1 July 2011
Jackbot parts
Looking for nice condition parts, as plastics, translite, targets.
Contact:
Sergio
Brazil
Posted: 30 June 2011
Mylared playfield wanted, any but preferably Williams. I need to remove the mylar from an F-14 and wanted to practice on another playfield first. I'm looking for a playfield in bad shape for that purpose. I can return the playfield to you after I remove the mylar or I can buy it outright and keep it.
Contact:
Andy Patko
voice: 2054173436
Birmingham, Al 35242
Posted: 28 June 2011
I need a back glass of a 1959 Gollieb - Lightning Ball pinball machine.
Contact:
Larry Bordeaux
Posted: 28 June 2011
I'm looking for
Data East Last Action Hero Translite - any condition
Data East Last Action Hero left blue 'tar pit' ramp - good condition
Please let me know what you have!
Contact:
Ron Lyons
voice: 704-507-6170
133 Caldwell St.
Rock Hill, SC 29730
Posted: 27 June 2011
Wanted: Circuit board or circuit board repair for Brunswick Aspen or Alive pinball machine circa 1978. Does anyone know where I could get a replacement circuit board of if they can be repaired and if so, who can repair them?
Contact:
Cate
voice: 503-516-7173
Portland, Or 97232
Posted: 26 June 2011
Wanted:
Bally backdoor for 1970's 4 player. (B&A, Hang Glider, etc.)
Bally Bow and Arrow paper (flyer, manual, schematic, etc.)
Bally EM score wheels
Will consider ANY Bally B&A or Hang Glider parts. Also, will consider any Williams Rancho parts.
Contact:
Marty
voice: 949-305-8428
Foothill Ranch, CA
Posted: 25 June 2011
Gottlieb Strikes & Spares pin unit complete. these are the little bowling pins that fold up when playing the game. I don't need the reset motor just the pin unit complete. This is fairly east to remove as a complete unit and should only take a minute or two. I know some of these games were scrapped for the displays and more. Let me know.
Contact:
Tim
voice: 3209635953
320 Highway 55 West
Maple Lake, MN 55358
Posted: 24 June 2011
Looking for Willams System 11CPU for High Speed
Contact:
Len Borkowski
1812 Mountainview CT
Florence, KY 41042
Posted: 24 June 2011
Looking for a Classic Stern Catacomb backglass, let me know what you have and how much you want for it.
Contact:
John P. Dayhuff
voice: 269-979-3836
Battle Creek, MI
Posted: 22 June 2011
Looking for right sling plastic for 1986 High Speed.
Contact:
Russ
Michigan
Posted: 21 June 2011
Wanted NOS playfield for 1976 Gottlieb Surf Champ / Surfer and NOS backglass for Surf Champ. Let me know what you have. You can text me at my cell: 1 (717) 330 - 9622.
Contact:
Mike
Posted: 20 June 2011
I'm looking for painted cardboard or vacuform interiors (scenery or targets) from 60s and 70s EM rifle games by Chicago Coin, Williams, Midway, etc. I may also be interested in targets/scenery from driving or tank/plane-type games. If you have any beat/dead/junk games that you are parting out that have artwork on the interior, please let me know. War/driving/jungle/western themes preferred. The only themes that I'm not looking for are carnival/circus themed games. Leads are also appreciated!
Contact:
Paul
Philadelphia, PA
Posted: 19 June 2011
Looking for a (Nice) 1981 Jungle Lord blue backglass. It doesn't need to be perfect. Please send pics and price.
Contact:
Bob Cunningham
voice: 772-978-1332, fax: 772-978-1334
699 8th Court
Vero Beach, Florida 32962
Posted: 17 June 2011
WANTED Back Glass for atari superman
Contact:
Ferrel Allan
245 E.artesia Bl.#5
Long Beach, Calif 90805
Posted: 17 June 2011
WWF Royal Rumble under trough part number 545-5439-00 or the entire assembly 500-5768-00. Interested in other parts as well for backups.
Contact:
Jason
Posted: 17 June 2011
1979 Bally Rolling Stones playfield plastics
I could use 3 red 'Bally' lane guides too.
Ideally, not broken or cracked.
Contact:
Kev N.
Posted: 16 June 2011
My name is Josh I have a 1972 Willams Spanish Eyes pinball machine I need a few parts for it like the plastic and nuts to hold them on and a book for it. I would love to get it to like new again if anyone could help. Please call me at 307-333-3456.
Contact:
Joshua
voice: 307-333-3456
1241 Derington Ave
Casper, Wyoming 82609
Posted: 16 June 2011
I am looking for the Theatre Of Magic scoop (04-10022) and the armature assembly (04-10019). Any leads would be appreciated.
Contact:
Chad
voice: 724-972-1926
West Newton, PA 15089
Posted: 15 June 2011
In need of a Spin Out backglass.
Contact:
Kevin Hilty
voice: 308-745-0323
Loup City, NE 68853
Posted: 15 June 2011
Looking for help! I have a 1977 Williams shuffle alley puck bowler and I am having a few problems. Does anyone know someone in the Chicago land area that will repair the unit?
Contact:
Tim
Posted: 15 June 2011
1993 Williams Star Trek TNG Moulded Plastic Playfield Models
In particular looking for the Borg Ship, Shuttle Craft on the right side ramp and any other plastic models. NOS would be nice !
Contact:
Adam
Posted: 13 June 2011
I am looking for a wood Lockdown bar that will fit a Exhibit Ranger 1947 Pinball Machine.
Contact:
Jeremy Paggen
1745 75th Ave NE
Sauk Rapids, MN 56379
Posted: 13 June 2011
I Need playfield parts for a Williams Super Flite or Strato Flite
Contact:
Bruce
Wisconsin
Posted: 13 June 2011
Looking for complete head with all inside parts for 1962 Williams World Series baseball machine. Needs to be complete, working or not.
Contact:
Doug Gregory
San Antonio, TX
Posted: 13 June 2011
WANTED! Bally Hoo 1969 original score card.
I have very many Bally 60's score cards for sale or trade (just not that one) and I have a game that needs one please. Also still looking for GTB El Dorado city of gold original black w/ white lettering score cards.
Contact:
Patrick
voice: 8473626255
P.o. Box 7275
Libertyville, Illinois 60048
Posted: 13 June 2011
1971 Gottlieb Four Square backglass- in decent condition or better
Contact:
Matti
31 Elmwood St
Maynard, MA USA
Posted: 12 June 2011
Looking for parts for Creature From The Black Lagoon. Anything from a project game, fire/water damaged game, populated playfield or just extra parts. Let me know what you have.
Contact:
John James
Millstone, NJ
Posted: 12 June 2011
1974 Big Brave or Big Indian Playfield
Can be populated or bare, and be willing to ship to Las Vegas, 89118.
Contact:
Scott
Las Vegas, NV
Posted: 11 June 2011
I'm the proud owner of a 1986 Pinbot. Missing the topper for it. Would love to find one.
Contact:
David Gunnell
voice: 480-229-7410
4031 E. Hackamore Circle
Mesa, AZ 85205
Posted: 9 June 2011
Looking for non pop bumper colored (marbled) bodies, skirts, and caps. (skirts will have a solid wire molded into plastic and may or may not have a flexible wire soldered to the solid wire) Attempting to restore a 1940’s war time conversion of Chicago Coins Sporty. The conversion was done by Vetches Panther and named PLA-MOR in June 1940.
I need the following old style bumper parts in the following colors:
GREEN: 4 bodies, 3 caps, 2 skirts
ORANGE: 2 bodies, 2 caps, 2 skirts
YELLOW: 4 bodies, 4 caps, 4 skirts
BLUE: 3 bodies, 1 cap, 2 skirts
PURPLE: 3 bodies
Interested in any or all of the above parts! Do you have just one of these parts? Please Call!
Contact:
Rob Hawkins
voice: 310 703 4843
3568 Inglewood Blvd.
Los Angeles, CA 90066 - 2850
Posted: 7 June 2011
Spin A Card
Will buy or trade.
Contact:
Ron Scelfo
voice: 561-818-3220
Palm Beach Gardens,, Florida
Posted: 5 June 2011
Wanted - 1960 Chicago Coin Six Game Shuffle Bowler backglass.
Contact:
Rick
Posted: 5 June 2011
1980 Gottlieb Roller Disco backglass, must be mint or as clouse to as posible. I need this very bad. Also looking for 1973 Gottlieb King Pin backglass, must be mint or as close to mint as posible & last 1975 Williams Triple Strike backglass, in mint condition or as close as possible!
Contact:
Will Gillette
voice: 315-487-3796
329 Dickerson Dr. N.
Camillus, New York 13031
Posted: 4 June 2011
1993 Gottlieb Teed off Centre Lane ball guide to VUK
Part Number #29882
Contact:
Noel Castell
Sydney, Nsw 2762 Australia
Posted: 4 June 2011
WANTED: Williams Riverboat Gambler NOS Playfied or Riverboat Gambler Playfield in *mint* condition. Also complete plastics set for same game. e-mail with pics and description, please.
Contact:
Clay
Posted: 4 June 2011
Looking for a Bally Evel Knievel playfield for the 1977 S/S version. Looking for one with no noticeable damage or significant ball wear.
Contact:
Tim Woods
voice: 618-923-3469
West Frankfort, Illinois
Posted: 3 June 2011
Need backbox for my 1966 Williams Casanova pinball. I figure any Williams pinball machine made this year (or maybe '65, and '67 as well) will have the same dimensions as my Casanova. just need good condition backbox, doesn't need to be Casanova.
Contact:
Jordan Bebout
Po Box 7162
Jackson, WY 83002
Posted: 2 June 2011
Backglass for 1973 Gottlieb Hot Shot and Jumping Jack, and 1984 Williams Space Shuttle. Must be 8 0ut of 10 condition or better. Pics available please. Also chrome 31" legs (60's-early 70's Gottlieb), need at least one or two sets-decent condition.
Contact:
Edward Darby
Louisiana
Posted: 1 June 2011
I am in the need of a backglass for a 1963 Gottlieb Swing Along and prefer to be as nice as possible. NOS would be great! You can TEXT me at my cell.
Contact:
Mike
voice: 717 330 -9622 TEXT
Posted: 1 June 2011
I am looking for a replacement CPU board or someone to repair my Bally display tester unit board. Drop me a note or call and leave a message.
Contact:
Herb Sampson
voice: 360 275 4998
Belfair, Washington
Posted: 1 June 2011
Need a backbox for a 1967 or 1968 Williams pinball machine. The specific machine is Casanova but any back box of that era will work, e.g. Beat Time, Jolly Roger, Student Prince, Derby Day, Lady Luck. The later boxes from 1969 on will not work since the glass will be too small for them. Don't need the back door, glass or insert, only the box.
I have had some responses to this in the past but when I try to contact the responders back they don't answer. Please respond only if you are serious and will respond to my e-mails and/or phone calls.
I only pay by PayPal, check or money order, NOT Western Union or MoneyGram so scammers can just stay away.
Contact:
Robert Woody
Jacksonville, FL
Posted: 1 June 2011
Pinball 2000 motherboard
Pin2K motherboard
Contact:
Judgeboz
Posted: 30 May 2011
1991 Gottlieb Surf n Safari
Central Red Whirlpool Ramp
Contact:
Brad
Australia
Posted: 29 May 2011
I need a backglass for the Williams Triple Action Pinball machine. Relatively good shape.
Contact:
Melanie
Nashville, TN
Posted: 29 May 2011
Need a good computer scann or Photo of a Backglass for a Exhibit 'Fast Ball' pin. Prefer a flatbed computer scann of the glass or a very good straight on photo.
Contact:
Gary Conway
Silverdale, WA
Posted: 29 May 2011
Looking for a replacement MPU board for Phantom of the Opera. It's the Data East/Sega Version 2 board, which I believe was in the following machines:
Monday Night Football
Phantom of the Opera
Playboy 35th Anniversary
Robocop
Secret Service
Time Machine
Torpedo Alley
If you have a fully working board that will function in my Phantom, email me with your asking price including shipping to zip 11746.
Contact:
Chris
Posted: 28 May 2011
Looking for head and backglass for the following games. Will take complete game if sold as parts game.
1973 Williams Darling Head and Backglass
1972 Williams Spanish Eyes Head and Backglass
1971 Williams Doodle Bug Head and Backglass
Contact:
Don
Posted: 27 May 2011
1975 Abra Ca Dabra Pinball Machine Original Backboard. Must be the original and in good condition.
Contact:
Heather Curtsinger
Posted: 26 May 2011
Looking for a complete pair of small flipper assemblies including mounting plate off a Jungle Queen, Space Invaders or similar location Australia.
Contact:
Peter Speranza
Posted: 22 May 2011
Wanted: Gottlieb Jumping Jack/Jack in the Box playfield in VGC or better. Populated or unpopulated ok. Please have clear pics. Have obsolete parts and literature for trade or will purchase outright.
Contact:
Michael Scott
voice: (702)378-4678
Las Vegas, NV
Posted: 22 May 2011
Looking for a good condition plastics set for my 1960 Williams Nags game.
Contact:
Greg Snyder
voice: 3143087027
1705ivychasecourt
Fenton, MO
Posted: 21 May 2011
Need a Space Odyssey back glass in excellent condition.
Contact:
David
Middleton, Wisconsin 53562
Posted: 20 May 2011
Looking for 1977 Gotlieb "Jacks Open" backglass in good condition.
Contact:
Moe Mizrachi
voice: 408-431-5593
Sunnyvale CA
Posted: 20 May 2011
1973 Gottlieb Hot Shot playfield plastics, center & 2 on left side of playfield.
Contact:
Steve
Qld Australia
Posted: 19 May 2011
Looking for Keeney coils. I need a bunch for my Keeney HI STRAIGHT pinball. Pinball Resource has some, but not all the ones I need. I am looking for one of each of the following coils: B4-3, 1326B4-2, B4-19, B3-16, B3-15, B3-21, B3-14, B4-40, B4-39, B4-42, B4-5. Again, I am only looking for one of each. Any help would be appreciated!
Contact:
Scott Bilot
voice: (414)839-7282 cell
2433 S. 61st Street
West Allis, Wisconsin 53219
Posted: 19 May 2011
Schematic wanted: Looking for a schematic for my 1960 Keeney HI STRAIGHT pinball. If you have one, and are either willing to sell, or make a nice copy of it for me, let me know your price. My game doesn't have one. Any help would be appreciated.
Contact:
Scott Bilot
voice: (414)839-7282 cell
2433 S. 61st Street
West Allis, Wisconsin 53219
Posted: 19 May 2011
The blinders for the The Who Tommy pinball game. My game was missing the mechanisem and the blinders that hid the flippers during blind play. Will pay top $ for this part.
Contact:
Larry
voice: 435-668-3058
Posted: 19 May 2011
Will be at the Allentown Pinball Show and looking for flyers, pinball promo plastics, posters, translites, schematics, manuals, 1970s-80s Replay, Cash Box, Marketplace, Vending Times, Playmeter Magazines, Always looking to purchase bulk lots of Pinball, Arcade, and Jukebox brochures.
Contact:
Joe Iozzia
Posted: 18 May 2011
For a friend, I am looking for all parts for a Mermaid pinball:
- used, NOS or repro playfield
- and just any part for that game, like animation in the front head, other playfield parts.
Contact:
Pascal Janin
France
Posted: 17 May 2011
WTB: Williams Sorcerer backglass in good condition.
Contact:
Zach Gutzmer
Garretson, SD 57030
Posted: 17 May 2011
I am in need of a stencil for THE CAB and HEAD of SLICK CHICK. Please call 561-818-3220 or e-mail ron2@hotmail.com
Contact:
Ron Scelfo
voice: 561-818-3220
Posted: 16 May 2011
Looking for a miracle - after a copy of the instruction card for a game called Dogs Race made in Italy circa 1973 by BEM
Contact:
Tony Mather
Posted: 15 May 2011
I need a back door and the channel the door rests in for a 1976 Bally Night Rider (EM version). Other Bally back doors from this same era would work. The door size is 28" wide X 25 1/2" tall. I can pick up at the upcoming PinFest 2011 in Allentown, PA on either Friday or Saturday.
Contact:
Larry Wolfe
Saint Albans, WV
Posted: 14 May 2011
1981 Bally FATHOM Apron + Shooter Guage. I prefer to be in VERY GOOD condition with NO missing paint and non-rusted. Some scratches here and there or OK but needs to go onto a high end restore!
Contact:
Jeff Miller
voice: 813-963-1199
Tampa, FL
Posted: 13 May 2011
Cleopatra EM or SS or Pyramid NOS Playfield
Contact:
Joe Grenuk
Posted: 12 May 2011
WTB: PZ Party Zone right side plastic ramp
Contact:
Bob C
Posted: 12 May 2011
I'm looking for the piece that goes between the backboard and cabinet sometimes referred to as the "pedestal" for an EM 1976 Bally machine (namely "Night Rider" although it appears that this is a standard size piece).
If you have one with no cracks and just nail holes, great! Just send me a note along with length/depth just to make sure it fits.
I prefer to pay with Paypal for security reasons although we can figure out something if that doesn't work.
Contact:
Steve Calderon
Phoenix, Arizona 85086
Posted: 11 May 2011
Williams Blue Chip 1976 - after original spinner
Contact:
Tony Mather
Posted: 11 May 2011
I have a Williams Pot O Gold. The Bagatelle action is not working properly. Not enough power to send the ball into bonus slots. Think maybe a new solenoid is needed. If anyone has one, contact me. If you can think of another possible problem, let me know.
Contact:
Randy Grottke
Posted: 10 May 2011
Looking for an empty cabinet and backbox. Wide-body or regular size.
I would prefer that cabinet hardware, legs, coin door, etc. are still intact, but I don't need any game-specific parts.
Would like something in driving distance of central Illinois.
Contact:
Kevin
Springfield, IL 62702
Posted: 9 May 2011
1977 Gottlieb Jet Spin Backglass wanted
Have a backglass but is heavily peeling looking for one in better condition
Contact:
Eli
Roseville, CA
Posted: 6 May 2011
Solar City: Looking for a 1977 Gottlieb Solar City bottom cabinet complete with relay board and playfield. Can pickup at the Allentown show. Something in restorable condition. I have a SC head. Need bottom cabinet.
Contact:
John
Lehigh Valley, Pennsylvania
Posted: 5 May 2011
WTB NOS score cards for Gottlieb Joker Poker SS.
Contact:
Chris Kingery
6318 46th St. CT W.
University Place, WA 98466
Posted: 5 May 2011
Gottlieb Wiring harness - I'm looking for the inner parts of a Gottlieb System 80's game. So if you are parting out a game, please let me know.
Contact:
Tammy
Blue Ridge, Virginia
Posted: 4 May 2011
Looking for a Stern Seawitch backglass in any sort of reasonable condition.
Contact:
Clay
voice: 248-390-5382
Northville, MI 48167
Posted: 4 May 2011
1981 Williams Jungle Lord - Backglass
Contact:
Vaskin
Posted: 1 May 2011
1994 Bally Shadow pinball assembly needed I'm looking for the whole target assembly A-18622. I think this is the part number it has the red brick target at the sanctum passage it has a 4 wire cionnector asell as a 3 wire connector please call 309 631 7136. The game is very nice but I really need this part.
Contact:
Kandkpinball
voice: 309631 7136
Rrock Island, IL 61201
Posted: 1 May 2011
Looking for the following:
-mint OEM or NOS backglass for a 1973 Gottlieb Big Brave.
-mint OEM or NOS backglass for a 1975 Gottlieb Sky Jump.
-scoring threshold card for Gottlieb Abra Ca Dabra. Card #A-14821. Scores are 75k, 89k, and 97k
-Scoring threshold and 5-ball cards for Bally Old Chicago. 5 ball card is #M-1508-53-K, and the 5-ball instruction card is #M-1508-53-A.
-Plastic shield for the center bullseye target on Gottlieb Big Brave. #A14954. Need this not cracked or broken.
-Correct scoring threshold card for Big Brave. 60K, 74K, 82K
Looking for all original parts and not repros or copies.
Contact:
Joe
CA
Posted: 1 May 2011
Need a backglass for a 1974 Gottlieb Big Indian. Took the game to a pinball show, and in the transportation the backglass delaminated the upper 30%. If anyone has a decent Big Indian backglass for sale I would love to hear from you.
Contact:
Clay
Northville, MI 48167
Posted: 28 April 2011
Need a Spirit of 76 bottom of the cabinet relay and score motor board.
Contact:
Bj Cunningham
voice: 573-424-7200
Rt.1
Centralia, MO. 65240
Posted: 28 April 2011
Looking for a Theatre of Magic speaker panel or just the plastic cover for the speaker panel
Contact:
Kurt Kuczynski
Fair Lawn, New Jersey 07410
Posted: 27 April 2011
1977 United/Williams Thunderbird shuffle alley chrome molding. Looking for control panel (front chrome molding piece, 1D-4279). This piece is 22.5" long x 6" wide. Has a window cutout for instructions and two smaller windows for player control and game select buttons. Need the buttons, button assemblies, and button mounting bracket as well.
Contact:
Tom Lutes
Valrico, FL 33596
Posted: 26 April 2011
1989 williams bad cats. Looking for slingshot plastics.
Contact:
Jim G
Posted: 25 April 2011
Looking for a 3 bank drop target for my 1990 williams Rollergames pinball. I need the whole assembly. Also looking for the 16 digit displays.
Contact:
Rob
voice: 928-710-6232
Arizona 86406
Posted: 25 April 2011
I'm looking for a Flash Gordon Playfield and Cabinet Stencils.
Contact:
Jeff Hoover
voice: 614-397-4722
6076 Batavia Rd
Westerville, Ohio 43081
Posted: 24 April 2011
Parts wanted for FunHouse Pinball Machine
Looking for a apron in excellent condition.
Also looking for a Rudy head replacement.
Contact:
Mark
Posted: 24 April 2011
1991 Data East Checkpoint ramp - must be in very good condition
Contact:
Dale
4309 E Willow Springs Road
Spokane, WA
Posted: 23 April 2011
I have a 1990 williams Rollergames pinball machine that needs a 3 bank drop target assembly part # C-11223-1 I need the whole thing, mine is missing. Also need the 16 digit display and 4 legs. If you know of any part from another game that will work with mine let me know.
Contact:
Rob
Lake Havasu City, Arizona 86406
Posted: 23 April 2011
Trying to get all plastics for 1990 Bally Dr Dude
Contact:
Jeremy
voice: 937-684-2352
Brookville, Ohio
Posted: 23 April 2011
Wanted: NOS factory backglass for a Bally County Fair Bingo. Could also use one for a Bally Golden Gate.
360-473-7104.
Contact:
Gary Conway
voice: 360-473-7104
Silverdale, WA
Posted: 23 April 2011
1989 Williams Bad Cats Slingshot plastics. Would be interested in complete set also.
Contact:
Jim G
Denver, CO
Posted: 22 April 2011
I am looking to buy some more NOS, or very good condition playfields.
I am not really in to EM stuff. Anything after 1976 or so. I love the late 70's and the entire decade of the eighties, but I am interested in anything. I have cash, and I am also interested in a large bulk purchase of a collection.
Contact:
Ron Kruzman
Galesburg, MI
Posted: 22 April 2011
I'm looking for a Bally 1981 Flash Gordon Playfield.
Contact:
Jeff Hoover
voice: 614-397-4722
6076 Batavia Rd
Westerville, Ohio 43081
Posted: 22 April 2011
Trashed play field from any of these Gotliebs: Quintette, Arabian Knights, Stage Coach, Gold Star; Classy Bowler. I need a part common to these games.
Contact:
Tom Speidel
Posted: 22 April 2011
Want to buy NOS or exceptionally nice Nitro Ground Shaker backglass
Contact:
Buddy Robinson
voice: 908-451-6011
57 Valley View Avenue
Summit, NJ 07901
Posted: 22 April 2011
Looking for a backglass for a Williams Pit Stop. Any condition considered. Please let me know price and condition.
Contact:
Brian Williams
voice: 920 565-3021
N9358 Franklin Rd
Elkhart Lake, WI 53020
Posted: 21 April 2011
Looking for parts for Allied Leisure Star Shooter cocktail Pinball.
Contact:
Shawn
Posted: 21 April 2011
1972 Chicago coin home run pitch and bat pinball machine. I need good quality digital pictures of the cabinet artwork for this game. I am refurbishing the machine and need to repain the cabinet back to its original scheme. Please help!!
Contact:
Dale
Posted: 20 April 2011
Looking for a Capcom Pinball Magic Stage or Stage Door Assembly. I only have the upper half of the assembly.
3 bank opto board for trunk lock assembly
Contact:
Curt Laven
voice: 816-522-0752
Liberty, MO
Posted: 20 April 2011
For any pinball flyers
Contact:
Matt
Beverly, MA USA.
Posted: 19 April 2011
I need 2 spinners for a Williams 1976 Grand Prix. I am looking for one that still have all the paint on the front and back.
Contact:
Matt
Beverly, MA USA.
Posted: 17 April 2011
Looking for a 95 WPC. for my NBA Fast Break pinball.
Contact:
Nicola
Posted: 16 April 2011
Looking for 1990 Wiliams WhiteWater Pinball in any condition. Please text or call?
Contact:
Dave
voice: 213-392-4324
CA 90806
Posted: 16 April 2011
Need part from trashed playfield. part common to Gottlieb: 1953 Quintette & Arabian knights, 1954 Stage Coach & Gold Star; 56 Classy Bowler. These games have Plastic gobble hole inserts in the playfield that light up. I need one for my Gold Star.
Contact:
Tom Speidel
Posted: 16 April 2011
Hello everyone, I have a 1933 Genco Silver Cup ( All Mechanical ) Pinball machine, Looking for any parts & paperwork, etc. for it. My game is in wonderful condition & is only missing 600 score cylinder. Could use a new door for the coin mechanism. Other than that the game works great & is and is in great condition.
Contact:
Bill Wellinger
voice: 413-275-4180
8 Magnolia Ave
Holyoke, MA 01040
Posted: 15 April 2011
Looking for the diamond shaped bumper cover for my old Gottlieb pinball - willing to pay a reasonable price for the same
Contact:
Peter Su
Cleveland, USA 44060
Posted: 15 April 2011
Jolly Roger - Need a comoplete Lightbox / Backbox, working or not.
Will take the whole game if the price is right.
1972 Gottlieb Cabinet (Grand Slam) any early 1970's cabinet will do.
1967 Williams Cabinet (Touchdown) any mid to late 1960's cabinet will do.
Contact:
Rich
Fort Lauderdale, Florida
Posted: 14 April 2011
1978 Bally Nitro Ground Shaker backglass- must be very nice.
Contact:
Buddy Robinson
voice: 9082770259
57 Valley View Avenue
Summit, NJ 07901
Posted: 13 April 2011
Wanted: 1961 Gottlieb Showboat backglass. Nice original or quality reproduction. Clear front and backside pics required.
Contact:
Michael Scott
voice: (702)378-4678
Las Vegas, NV
Posted: 12 April 2011
Wanted: Mata Hari EM version backglass. Almost any condition accepted besides broken. Will need clear front and back pics of the glass. Have machines, obsolete parts for trade or cash. I will arrange shipping.
Contact:
Michael Scott
voice: (702)378-4678
Las Vegas, NV
Posted: 12 April 2011
1978 Atari Superman. Looking for a set of boards (processor and IO board).
Contact:
Games People Play
voice: 928-776-9500, fax: 928-776-9505
6550 E 2nd St Ste B
Prescott Valley, Arizona 86314
Posted: 9 April 2011
1992 Bally Doctor Who ~ Mini-Playfield elevator assembly: basically I want the entire bracket w/ cam, motor etc. Preferably nos or off a low mileage machine.
Contact:
Josh
Ottawa Canada
Posted: 9 April 2011
I am looking for a parts game called Hot Shot, 1973 made by Gottlieb. Email with what you have.
Contact:
Norm
Rr
Moberly, MO 65270
Posted: 9 April 2011
I am looking for the 7 target drop assembly for a Gottlieb Hot Shot EM pinball machine. Email with your price shipped to 65270. Must be in good shape with no broken parts except maybe a target.
Contact:
Norm
Rr
Moberly, MO 65270
Posted: 9 April 2011
looking for backglass, any shape, for a Bonanza machine
Contact:
W Sychr
Posted: 9 April 2011
Looking for plastic playfield parts for Bally's Game Show
Contact:
Kevin
voice: 216-650-0607
Hudson, OH
Posted: 9 April 2011
Center playfield plastic for Gottlieb Hot Shot/Big Shot. Somebody made reproductions of the a few years ago.
Can anybody help?
Contact:
Tony Mather
Posted: 8 April 2011
Looking for NOS or excellent original instruction cards for: Klondike, Happy Clown, Hot Shot, Jungle Queen, Love Bug, Spanish Eyes, Sky Jump, Fireball, Captain Fantastic, Wizard and World Fair
Contact:
Tony Mather
Posted: 8 April 2011
1968 Williams Pit Stop - Slingshot Plastics
My Pit Stop is missing the left slingshot plastic. I tried to make one - just doesn't look the same. I would gladly buy both if available.
Please let me know what you have. Scammers need not reply.
Contact:
Pmcgee
Houston, Texas 77006
Posted: 7 April 2011
Need Mutoscope Sky Fighter parts. Mostly need the "clouds" drum of the target mechanism. Also the stepper/motor unit in the head for the random lights. Not shots or points steppers.
Contact:
Izzy Schwartz
voice: 916-922-5214
Sacramento, CA 95815
Posted: 6 April 2011
Wanted, good backglass for a williams Casanova and Williams Suspense. Could also use a excellent to NOS playfield for both.
Contact:
Gary Conway
voice: 360-473-7104
Silverdale, WA
Posted: 5 April 2011
Wanted: Lockdown bar (END CILL) needed for a Bally Bikini or Lido.
Contact:
Gary Conway
Silverdale, WA
Posted: 5 April 2011
Williams Gusher playfield and plasics.
Contact:
Mike Johnson
Posted: 4 April 2011
Looking for a 1957 Genco Lucky 7 roll down game schematic. A copy would be great,
Contact:
Clay
Northville, MI 48167
Posted: 3 April 2011
Looking for one Joker Poker piece A-17612. it is the triangular piece in the center, can anyone help.
Contact:
Dom
Montreal, Canada
Posted: 2 April 2011
I am looking for a Gottlieb Volley head - CABINET ONLY - mine is delaminating. Please call or email if you have one.
Also looking for a Williams Doodle Bug backglass - average to excellent condition is fine. I'm in Texas so closer is better.
Contact:
Bill Ische
voice: 972-304-3042
320 Crooked Tree CT
Coppell, TX 75019
Posted: 2 April 2011
Looking for complete playfield for Gottlieb Bad Girls. Would like one in good shape but would also consider one for parts only. Please let me know what you have.
Contact:
Richard Strunks
Fort Smith, Arkansas
Posted: 2 April 2011
Wanted Fish Tales fishing reel part #03-8612 or whole assembly # A-14945 all I need is black plastic that holds the three balls pay top dollar
Contact:
Miller
Posted: 1 April 2011
Bally, Sea Ray, Wanted: Replacement backglass for my Bally Sea Ray Pinball Machine. Rescreen, reprint, or N.O.S. Help out an old gamer.
Contact:
Kyle Warner
voice: 206-444-5106
11224 25th. Ave. S.W.
Seattle, Washington 98146
Posted: 31 March 2011
Dr Dude, Need the speaker cover that mounts on top of the head above the backglass.
Contact:
Bill Moschini
voice: (302)250-5613
409 Darwin Dr
Newark, Delaware 19711
Posted: 31 March 2011
Game Plan MPU-1 Board with battery damage.
2 damaged sockets removed, missing one IC,
Needs traces repaired or cut and strapped, untested.
$25
Game Plan MPU-1 board light battery damage
new caps, bad reset section, with Star Trip Rom.
$35
Stern MPU-100 Board
Untested, with Cheetah Roms.
$35
Stern MPU-200
Untested since removal, but was pulled from a working machine.
$50
Hot Tip
Apron, shooter gauge, ball arch pieces
and miscellaneous playfield parts.
Good condition stuff
$35
Contact:
Tony
Portland, Or Usofa
Posted: 31 March 2011
I am after a Gottlieb Joker Poker SS pinball manual has to be in good condition
Contact:
Peter
Australia
Posted: 31 March 2011
Mousin Around. Need the speaker cover that mounts on top of the head above back glass.
Contact:
Bill Moschini
voice: (302)250-5613
409 Darwin Dr
Newark, Delaware 19711
Posted: 31 March 2011
Speaker cover needed from any of the following games. Bally:Party Zone, Mousin Around, Harley Davidson, Dr Dude, Elvira and the party monsters, Alantis, Gilligans Island, Radical or Transporter the rescue.Must be straight, no dents. This is the speaker cover that mounts on top of the head above the back glass.
Contact:
Bill Moschini
voice: (302)250-5613
409 Darwin Dr
Newark, Delaware 19711
Posted: 31 March 2011
Wanting a complete NOS set of Elvis pinball plastics
Contact:
Peter
Australia
Posted: 30 March 2011
Evel Knievel "EK" static bumper caps in good condition.
Contact:
Tom Taylor
Posted: 28 March 2011
1981 Bally Embryon complete plastic set--must be nice to mint condition
Contact:
Chris
Posted: 27 March 2011
2" gobble hole play field insert as used on 50's Gotlieb games like Gold Star or Arabian nights etc.
Contact:
Tom Speidel
Posted: 27 March 2011
I am looking for a lockdown bar for a 1958 Bally "All Star/ Deluxe" bowler. If you have one please contact me.
Contact:
Dirk
voice: 805-440-8475
Atascadero, CA 93422
Posted: 27 March 2011
Looking for an instruction card for a Midway Mystery Score pitch and bat. A copy of an original would be Great.
If you can help please contact me.
Contact:
Dirk
voice: 805-440-8475
Atascadero, CA 93422
Posted: 27 March 2011
Looking for a schematic for a 1946 Bally Undersea Raider arcade game. A copy of an original would be Great. If you can help please contact me.
Contact:
Dirk
voice: 805-440-8475
Atascadero, CA 93422
Posted: 27 March 2011
I am working on a 1947 Chicago Coin Basketball Champ I need a bottom control board for it. If you have this part please contact me.
Contact:
Dirk
voice: 805-440-8475
Atascadero, CA 93422
Posted: 27 March 2011
I am working on a 1955 Genco Champion baseball. I am looking for the head unit for the game. If you have one available please contact me.
Contact:
Dirk
voice: 805-440-8475
Atascadero, CA 93422
Posted: 27 March 2011
I am working on a 1957 Dale "Cops and Robbers" also known as a Burp Gun. I need a coin mech/slide and a wiper arm for the gun assembly. If you have either of these parts please contact me.
Contact:
Dirk
voice: 805-440-8475
Atascadero, CA 93422
Posted: 27 March 2011
Looking for a 9174 Gottlieb Sky Jump or Free Fall playfield in very good to excellent condition
Contact:
Brian Munson
Posted: 27 March 2011
Wanted backglass for a Gottlieb Eye Of The Tiger Must be in really good condition
Contact:
Ed Kelsey
voice: 860-794-7834
294 Reed Ave
Windsor Locks, CT 06096
Posted: 27 March 2011
Looking for a New Old Stock (NOS) Playfield for Gottlieb Bad Girls
Contact:
Richard Strunks
Fort Smith, Arkansas 72908
Posted: 26 March 2011
Looking for a set of New Old Stock (NOS) Playfield Plastics for Gottlieb Raven.
Contact:
Richard Strunks
Fort Smith, Arkansas 72908
Posted: 26 March 2011
Chicago Coin Fascination: Again, paper work, plastics, replaceable balls, hardware such as springs, etc. This was a very tall game that went by two names. The one I have has balls that you can control up but just not down.
Contact:
Steve Campbell
Oklahoma
Posted: 25 March 2011
Americoin Dozer: Any paper work, any plastics, anything for this game would be much appreciated. Thanks to John Robertson I have some coming but it never hurts to see what else might be out there.
Contact:
Steve Campbell
Oklahoma
Posted: 24 March 2011
Need translite for F14
Contact:
Peter Baluk
40 Viscount Road
Brantford, Ontario N3p1j2
Posted: 23 March 2011
KNIFE & DIVERTER ASSEMBLE for THE SHADOW PINBALL #A-19638-1
Contact:
C
Posted: 21 March 2011
Trough Weldmet for Star Wars Trilogy PINBALL
Contact:
C
Posted: 21 March 2011
Looking for parts for 1989 Williams Bad Cats. Need the fish bowl ramp, and the top plastic for the bonus wheel. Please e-mail or call
Contact:
Carah
voice: 319-429-1273
3218 Kipling Rd
Waterloo, Iowa 50701
Posted: 20 March 2011
WTB: Zaccaria 7 Digit Diplays to suit Farfalla, Devil Riders, and Time Machine pinballs.
Contact:
Derek
Posted: 19 March 2011
1988 Data East Time Machine lower cabinet in very good condition.
Contact:
Todd S
voice: 612 419 6852
Minnetonka, MN 55345
Posted: 18 March 2011
1997 williams Attack From Mars, nead new playlield.
Contact:
Pierre Galarneau
voice: 450-795-8733
Quebec Canada
Posted: 18 March 2011
Looking for Memory Lane back glass in great shape
Contact:
Doug Ray
1321 Michael
Grinnell, Iowa
Posted: 15 March 2011
Looking for backglasses for Gottliebs Genie, Buck Rogers, and Ballys Cybernaut. Can you direct me and how much.
Contact:
Sam Aaltonen
voice: 508-648-7115
305 Pleasant Pines Ave
Centerville, Mass. 02632
Posted: 14 March 2011
I'm looking for baseball game parts. Chicago Coins Home Run 1972. Back glass and armature p/n 29-251 2-3 and targets, ball flap. Williams Ball Park 1967 back blass and ball flapper and targets. Williams Line Drive 1972. Back glass, targets plastics, targets. All games are pitch and bats.
Contact:
Paul Besser
voice: 630-377-6870
3n747 Baert Lane
Saint Charles, Ill. 60175
Posted: 12 March 2011
Good to very good playfield for 1974 Gottlied Sky Jump or artwork for the playfield
Contact:
Brian Munson
voice: 434-258-1387
6195 Otterville Road
Goode, VA 24556
Posted: 11 March 2011
1965 Bally Sheba backglass
Contact:
Jason Caldwell
voice: (423) 572-1996
Tennessee
Posted: 8 March 2011
1988 Williams Cyclone
I need the Cyclone ramp itself, with decal, VG to mint. Will consider a full set (Cyclone, Comet, Ferris wheel) if necessary. NOS or mint repro preferred.
Contact:
Scott
Posted: 8 March 2011
Looking for a Taxi playfield, will take a real cheap junker to be redone.
Contact:
Joe Morone
625 Sacandaga Rd.
Glenville, NY 12302
Posted: 8 March 2011
Williams Lucky Seven: I need a good backglass for a Williams Lucky Seven.Send price and pics.
Contact:
Doug
MN
Posted: 8 March 2011
I am looking for a Bally Mystic backglass or translite, if you have one for sale or may know where I can find one please contact me.
Contact:
Jason V
Saskatchewan Canada
Posted: 7 March 2011
1940 Bally Attention manual/schematics/flyer/wood leg/extra parts needed. Looking for any of the above. If you have any of these please email me, I'm looking to purchase.
Contact:
William
Posted: 6 March 2011
1981 Bally Centaur Lockdown Bar. Looking for one that's in good shape, mine is worn from years of use.
Contact:
Tony
Cleveland, Ohio 44147
Posted: 6 March 2011
Need back and pin hood for United Cascade six player puck bowler. All I curently have is the table.
Contact:
Doug
voice: 801-597-8417
West Jordan, Utah 84081
Posted: 6 March 2011
Wanted: Playfield plastics for Apollo 13.
Contact:
Gregg Burgess
Great Falls, VA United States
Posted: 6 March 2011
1964 Williams 10th Inning Coin Box
Contact:
Rich Huff
Posted: 5 March 2011
1978 Bally PLAYBOY backglass and playfield, must be 8-10.
1978 Bally POWERPLAY backglass. Must be 8-10.
1977 Evel Knievel BACKGLASS must be an 8-10.
Contact:
Jeff Markvan
Pgh, PA
Posted: 5 March 2011
Williams Fun Fest backglass needed. I am not that picky on condition. As long as it is all in one piece and is readable. Your time is appreciated.
Contact:
Steven
voice: 317-441-2462
Indianapolis, IN
Posted: 5 March 2011
Looking for a backglass for HOME RUN (1971, Gottlieb)
Must be in very good condition, no flaking
Contact:
Clint
voice: 6107814303
370 Washington Ave
Phoenixville, Pennsylvania(pa) 19460
Posted: 4 March 2011
I'm looking to purchase day-glo painted interiors (scenery or targets) from 60s and 70s EM rifle games by Chicago Coin, Williams, Midway, etc. I may also be interested in targets/scenery from fluorescent driving or tank/plane-type games. I don't need any mechanical parts, only the targets/scenery/artwork from the interiors. However, I might be interested in some score reels or timer mechanism (non-working is fine) from one of these games also. If you have any beat/dead/junk games that you are parting out that have fluorescent artwork on the interior, please let me know. Leads are also appreciated!
Contact:
Paul
Posted: 3 March 2011
Looking for a Cirqus Voltaire "Ring 2" Playfield insert. Ring 1 and 3 will work as well since all 3 are the same. They are the Teal colored lighting bolt inserts. Please let me know what you have. Will pay $40 for a single NOS insert or used one in perfect condition.
Contact:
Mark Pegram
voice: 513-759-0396
5892 Franklin Trail
Hamilton, Ohio 45011
Posted: 3 March 2011
Looking for a playing field overlay for Captain Fantastic.
Contact:
John Dobbs
Posted: 3 March 2011
Trade Winds backglass wanted! Looking for a very good or better backglass for a 1962 Williams Trade Winds. Please send pics and asking price.
Contact:
The Pinball Revival Co
372 Bel Marin Keys Blvd
Novato, CA 94949
Posted: 3 March 2011
1951 Williams Super World Series - after the metal 'channel' that runs under the playfield that guides the ball to the 'ball pitching' mechanism.
There was a trashed complete game on eBay about 6 months ago, so I know the part is out there!
Contact:
Tony Mather
Posted: 2 March 2011
I am looking for two 25 inch front Legs for a Williams Alpine Club Restoration. These legs were used in 1965, 66 willimas games Alpine club, Ski Club, Big Chief, Bowl A Strike, Lucky Stike, Eager Beaver, Moulin Rouge, Pot O Gold, Teachers Pet, Eight Ball, A-Go-Go. If you have any of these legs for sale please email me.
Contact:
Steven Wolejko
168 Quarry Brook Drive
South Windsor, CT USA
Posted: 2 March 2011
I am restoring a Gottlieb Jack in the box looking for Target Set and most importantly a very good condition backglass or translite?
Contact:
Sergio
Stoney Creek, Ontario Canada
Posted: 2 March 2011
Star Wars Translite (1992) Data East. Prefer VG or better condition. NOS or repro ok.
Contact:
Mike Phillips
voice: (248) 770 8809
Michigan USA
Posted: 2 March 2011
Tee'd Off (1993) Gottlieb parts. Looking for RH and LH ramps. Also, the 2 foot metal ball guide that runs from the shooter entry point to the first out-hole.
Contact:
Mike Phillips
voice: (248) 770 8809
Michigan USA
Posted: 2 March 2011
Looking for 1994 Maverick LCD display.
Contact:
Michael Abbott
voice: 3039317944
10015 N Lee St
Westminster, CO 80021
Posted: 1 March 2011
Wanted: Playfield plastics set for a Gottlieb '300' or Topscore. Incomplete set OK, but need most of right side pieces. Will consider parts machine with nice backglass and decent playfield.
Contact:
Wes Dolen
voice: 239-825-8861
Naples, Florida 34116
Posted: 28 February 2011
Looking for a used playfield for a Bally Bobby Orr's Power Play. Can be partly populated, either upper or lower side(s), but with very minimal or no wear. Sure prefer it if the plugs were there, too.
Contact:
Alan Leroy
Jarrettsville, Maryland 21084
Posted: 27 February 2011
Looking for plastics for Judge Dredd. Any of them other that sling would be great. If you don't have any but could scan a set that you have, that would also work, I can make my own.
Contact:
Steve
voice: 612-353-7552
Posted: 27 February 2011
Looking for 1964 Gottlieb Majorettes repro backglass or Complete game with near perfect backglass
Contact:
Buddy Robinson
voice: 19082770259
57 Valley View Avenue
Summit, NJ 07901
Posted: 26 February 2011
Looking for decent playfields for any of the following GOTTLIEB machines: Jockey Club, Frontiersman, Sluggin Champ and Rainbow. Minimal wear, minimal damage. Can be unpopulated. Price is negotiable. Have parts and machines also for possible trades if desired instead. Will need to see detailed pics. No foreign offers.
Contact:
Alex
CT
Posted: 26 February 2011
1965 Williams Pot O Gold
Parts Needed: Ball count stepper unit. 0's Reel Unit with springs, pawls, etc. 100's Reel unit, again same thing.
I am open to buying another Pot O Gold is need be.
Contact:
Steve
73069
Posted: 25 February 2011
Looking for a schematic for any of the Bally one ball payout machine from the early 1940's. Kentucky, Long Shot, Sport King, etc. Let me know what you have.
Contact:
Jim
Posted: 25 February 2011
Looking for Gorgar backglass. "Good" condition or better. Let me know what you have.
Contact:
Randy
voice: 817-355-0134
6 Mistywood Court
Mandfield, Texas 76063
Posted: 25 February 2011
1975 Gottlieb '300' or Top Score right side sling plastic (# A-14379-R), also the right side plastics at the center and lower bonus targets, prt#s A13785 and A13786. Also looking for a '300' (four player) backglass.
Contact:
Wes Dolen
voice: 239-643-1100
Naples, Florida 34116
Posted: 23 February 2011
Square Head instruction card
Also need :Miss O, Heat Wave, Apollo, Havana Pinball instruction Cards
Contact:
Jonn Jones
Melbourne, Vic, Australia
Posted: 23 February 2011
Looking for a 1976 Bally Hokus Pokus backglass. I already have the rest of the machine, all I need is the back glass.
Contact:
Jason Suwyn
voice: 616 889 7552
Posted: 22 February 2011
I am searching for the LEFT RAMP for a Gottlieb Cactus Jack's (Cactus Jacks) pinball machine. This is the ramp on the left side of the playfield that leads down to the rollover lane by the left flipper. If anyone has one please email me! If this message is still up then I still need one.
Contact:
Dave Bheam
Jennerstown, PA 15547
Posted: 21 February 2011
Looking for a backglass for a 1972 Williams Honey pinball.
Any condition considered, mine is broke. Let me know price and condition.
Contact:
Brian Williams
voice: 920 565-3021
N9358 Franklin Rd
Elkhart Lake, WI 53020
Posted: 19 February 2011
Looking for Capcom pinball parts for Airborne project.
Looking for the following parts:
Capcom CPU board A0015405
DMD Display 128x32
Translite (Airborne pinball)
Apron
Right Flipper assembly
Lockdown bar.
Contact:
John Jones
Kitchener, On
Posted: 16 February 2011
Wanted a full complete set of Bally Vector plastics to finish machine other wise it it will be broken up for spares and must accept Paypal.
Contact:
Paul Parker
14 Alauna Avenue
Alcester, Warwickshire UK
Posted: 15 February 2011
This information is current as of February 13, 2012 3:52:03 MST
© Copyright Mr. Pinball 2012. All Rights Reserved.