| Sides, 2 |
1/8" thick C1018 low-carbon steel, 2.75" x 14" |
Small Parts ZRTS-2/64-36 4" x 36" cold rolled $15.50 2003 |
| Sole |
3/16" thick C1018 low-carbon steel, 2-3/8" wide x 14" long |
MSC: 06203301 Ground flat stock, 24" x 3" x 3/16": $36.17 2002 |
| Throat plate |
3/8 x 2 x 1-3/4 low-carbon steel bar |
Small Parts ZRTS-6/32-6 c1018 cold rolled, 3/8 x 2, 6" lg. $4.80 2003 |
| Adjuster |
Norton style double-threaded |
Bristol Design † PA-1 £37.00 2003 |
| Lever Cap w/thumbscrew |
Bronze, 2" wide |
Bristol Design † PC-22 £13.50 2003 |
|
| Bumpers, 2 (blade guides) |
Set screws, slotted ("grub" screws), 10-32 x 3/16 |
McMaster-Carr
94025A160 stainless cup-point $5.07/25 2002 |
| Lever Cap shaft |
(2) Low head shoulder screw, slotted head, 3/16 diam. x 1/2 shoulder, 8-32 |
McMaster-Carr
99154A370 $2.82 2004 |
| (1) Female threaded hex standoff, 1/4" hex x 1-1/4" long, 8-32 |
McMaster-Carr
91115A202 $3.09 2004 |
| Infill |
East Indian Rosewood, 9/4 x 5 x 10 |
Eisenbrand $35 2003 |
| Iron |
3/16" x 2" x 7" 0-1 tool steel |
McMaster-Carr
9018K117 Oversize (.200 thick x 2.015 W) x 18" long $22.08 2003 |
| Back iron |
1/8 x 2 x 4-1/2 low carbon steel |
Small Parts ZRTS-2/32-36 Cold rolled C1018 steel, 1/8 x 2 x 36 $6.50 2002 |
| Iron screw |
3/8-16 x 1/2 slotted pan-head * |
McMaster-Carr
91792A619 stainless 10/$4.62 2002 |
| Cross pins, throat plate rivets |
3/16" rod, low-carbon steel or cast iron |
Small Parts U-ZRS-3-36 cold rolled C1018 steel, 3 ft. $1.90 2002 |
| Cross pin spacers |
3/16 ID brass tube |
Small Parts: TTRB-04H-36 alloy 260, 1/4" OD .029" wall 3' long $6.11 2003 |
† Bristol Design email: tools@bristol-design.co.uk