Wax Compositions for three dimensional effects
A 3-D alteration of the shape of the nose may be achieved with the materials described as follows. When working with these materials the fingers should be dipped in a gel, or water if gel is not available to prevent the wax material from adhering to the fingers. 3-D wax preparations should be applied and sealed, using KRYOLAN Sealer before the foundation. After the performance the artificial (sculpted) nose may be removed by holding a thread between two fingers and sliding the thread down the bridge towards the tip of the nose to loosen the wax material, the residue of which may then be removed with Make-up Remover.

Nose Putty
Wax stick composition for moulding noses. Manipulate in hand until mouldable. Recommended using gel on fingers to prevent putty from sticking to fingers. May be adhered to skin with Spirit Gum.

Soft Putty
Soft nose putty, suitable for general moulding use. May be adhered to skin with Spirit Gum.

Plastici, Nose and Scar Wax

Plastici Stick
A tinted soft wax stick for modeling noses, chins, or facial contours on bony surfaces.

Eyebrow Plastic
Flesh-colored wax stick for blocking out eyebrows. Wax stick may be first applied on brow in stroking motions from nose bridge out to end of brow. Reverse motion, "against the growth" of brow then repeat first motions "with the growth" of the brow to smooth wax in place. When brow is covered with wax, cover wax with 1 or 2 coats of sealor (K01481/K01480, listed below). As an alternative Eyebrow Cover, you may use Water Soluble Spirit Gum (K06000, K06001, K06002, listed below).

Water-Soluble Spirit Gum

Special Plastic
A high quality micro-crystalline wax. Ideal for creating scars and changing contours. Excellent for blocking out very bushy eyebrows. Should be coated with Sealor K01481. Flat round container with 1.3 oz.

Flexible Sealor
A quick-drying liquid for sealing wax surfaces and prosthetics before applying makeup. Soluble and removable with alcohol. Replaces flexible collodion.

Flammable, Must be shipped UPS ground.

Products for alteration of skin structure

FX Wax
Works great for recreating scars, warts, and other special effects. Apply with wet fingers. To remove, use a spatula and scrape off with soap and warm water. .

Rigid Collodion, for scar effects
The traditional scar effect material which shrinks the skin to simulate an intended cut. Warning: contains ether. Repeated use in the same area can irritate the skin.

Flammable, Must be shipped UPS ground.

Tuplast

Tuplast is a product developed for the make-up artist for creation of especially realistic scars and other skin anomalies. Tuplast is based on a synthetic material that is also used in dental practice.

Application:
Tuplast is applied directly from the tube and can be easily shaped with a spatula after it has begun to dry. After Tuplast has completely dried, scars and other skin anomalies created with it are waterproof. They can be removed by being simply pulled off. Supracolor and Dermacolor are especially effective for making up Tuplast creations. Since Tuplast contains a strong component of acetone, be especially careful when using it near mucous membranes and eyes.

Available colors:  skin color and transparent

Old Skin Plast, Matt
Special product for creation of wrinkled skin. Apply with 1 1/2" natural bristle brush. Use in well ventilated areas or with fan.
Advantages over latex method: 1) Speedy application, 2) doesn't require a hair dryer because it dries rapidly. For slower application may be thinned with Acetone. To remove use OLD SKIN PLAST Remover K02037 (listed above). This product is designed for professional use only. Should not be used on hypersensitive skin.

Flammable, Must be shipped UPS ground.

Old Skin Plast, Remover

Flammable, Must be shipped UPS ground.

Old Age Stipple
Liquid latex stipple used to create aged skin effects and for blending prosthetics. Apply with a foam rubber sponge while skin is stretched, dry with a hair dryer on low heat and powder before skin is relaxed. Most naturalistic effect for film, TV, and photo.

Gel Fix Skin Pack
Ready prepared gelatin based product. Heat in water bath and apply to desired area. Check temperature prior to application. May be removed with soap and warm water. Bottle with 2 oz.

Select: clear, red, flesh.

Download the 19 page Kryolan Product List in PDF format Right Now!