Re: [CANSLIM] Rev 2 of screen compiler

From: "Rich W" <rich1334@brick.net>
Subject: Re: [CANSLIM] Rev 2 of screen compiler
Date: Mon, 8 Jul 2002 19:46:21 -0500

Next Article (by Subject): Re: [CANSLIM] Rev 2 of screen compiler "Norman"
Previous Article (by Subject): Re: [CANSLIM] Rev 2 of screen compiler "Alicia Lensing"
Top of Thread: RE: [CANSLIM] Rev 2 of screen compiler "Walter Wittesch"
Next in Thread: Re: [CANSLIM] Rev 2 of screen compiler "Norman"
Articles sorted by: [Date] [Author] [Subject]

Mike,
I have Out look Express, but was able to down load and save file in .zip
format
opened it and ran it, seems something is wrong
Got this Error  "run-time error 1004"     "select method of range class
failer"
also got a new file "composite.xls" with 5 tabs at bottom, which are May 1,
6, 7, 8, & 9
On the screencomplier I got RS but Column C & D are blank, so now not sure
what to do next
I do have a lot of screen files, starting from 3/15, have every one to today
7/8
I did try this more than once, same thing,
thanks if you can help me, as not very good with  macro's, which I think is
where the problem
may be, and not able to know how to fix.

Rich Weinhold
636-240-7267
AAII CISIG Group.
STL Stock Analysis
Group  Coordinator
- ----- Original Message -----
From: <michael_niemotka@baxter.com>
To: <canslim@lists.xmission.com>
Sent: Monday, July 08, 2002 3:19 PM
Subject: [CANSLIM] Rev 2 of screen compiler


Hi all

Attached is version 2 of the screener compiler. In this version, the RS
ratings for each stock are taken from each individual file , and placed on
the master sheet.

When the clean up of the list is done, the highest RS value (if it exists)
for each stock is the one that gets saved.

Let me know how it works.

Mike

(See attached file: screenercompiler2.0.zip)



Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com



- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim".  Do not use quotes in your email.

Go to Jeff Salisbury LWGate Home Page.