Go to Jeff Salisbury LWGate Home Page.From: michael_niemotka@baxter.com
Subject: Re: [CANSLIM] Rev 2 of screen compiler
Date: Tue, 9 Jul 2002 10:18:04 -0500
Next Article (by Subject): [CANSLIM] The Acc/Dis "A's" don't look healthy! "Fred Richards"
Previous Article (by Subject): Re: [CANSLIM] Rev 2 of screen compiler "Tom Worley"
Top of Thread: Re: [CANSLIM] Rev 2 of screen compiler "Tom Worley"
Articles sorted by: [Date]
[Author]
[Subject]
Rich,
Would it be possible for you to zip up all your screens of the day and send
them to me so I can try to debugg it? I am wondering if it is possible
that the format of the files downloaded from IBD has changed slightly, and
that might be causing the problem
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
"Rich W"
<rich1334@brick.net> To: canslim@lists.xmission.com
Sent by: cc:
owner-canslim@lists.xm Subject: Re: [CANSLIM] Rev 2 of screen compiler
ission.com
07/08/2002 07:46 PM
Please respond to
canslim
Mike,
I have Out look Express, but was able to down load and save file in .zip
format
opened it and ran it, seems something is wrong
Got this Error "run-time error 1004" "select method of range class
failer"
also got a new file "composite.xls" with 5 tabs at bottom, which are May 1,
6, 7, 8, & 9
On the screencomplier I got RS but Column C & D are blank, so now not sure
what to do next
I do have a lot of screen files, starting from 3/15, have every one to
today
7/8
I did try this more than once, same thing,
thanks if you can help me, as not very good with macro's, which I think is
where the problem
may be, and not able to know how to fix.
Rich Weinhold
636-240-7267
AAII CISIG Group.
STL Stock Analysis
Group Coordinator
- ----- Original Message -----
From: <michael_niemotka@baxter.com>
To: <canslim@lists.xmission.com>
Sent: Monday, July 08, 2002 3:19 PM
Subject: [CANSLIM] Rev 2 of screen compiler
Hi all
Attached is version 2 of the screener compiler. In this version, the RS
ratings for each stock are taken from each individual file , and placed on
the master sheet.
When the clean up of the list is done, the highest RS value (if it exists)
for each stock is the one that gets saved.
Let me know how it works.
Mike
(See attached file: screenercompiler2.0.zip)
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
Next Article (by Subject): [CANSLIM] The Acc/Dis "A's" don't look healthy! "Fred Richards"
Previous Article (by Subject): Re: [CANSLIM] Rev 2 of screen compiler "Tom Worley"
Top of Thread: Re: [CANSLIM] Rev 2 of screen compiler "Tom Worley"
Articles sorted by: [Date]
[Author]
[Subject]