Go to Jeff Salisbury LWGate Home Page.From: "Duke Miller" <dukemill@tampabay.rr.com>
Subject: RE: [CANSLIM] Rev 2 of screen compiler
Date: Fri, 19 Jul 2002 10:56:55 -0400
Previous Article (by Subject): RE: [CANSLIM] Rev 2 of screen compiler michael_niemotka@baxter.com
Articles sorted by: [Date]
[Author]
[Subject]
I've been doing my best to collect SODs since December. I looked at the
directory they're in today, and many repeat with regularity. So, if
you're looking to find the most recent attractive stocks from SOD, copy
the most recent, by category, into a separate directory before running
Mikes Magic Macro (3M).
Those that have only made a single appearance since I've been saving
them are: Sponsorship 3/27; Top Industry Screen 3/31; Retail Sector
Leaders 4/24; Volume Surges 5/9; Russell 2000 Leadership 5/6; Inside
Ownership 5/13. The rest have appeared on average 4 times.
Duke
- -----Original Message-----
From: owner-canslim@lists.xmission.com
[mailto:owner-canslim@lists.xmission.com] On Behalf Of
michael_niemotka@baxter.com
Sent: Friday, July 19, 2002 10:15 AM
To: canslim@lists.xmission.com
Subject: RE: [CANSLIM] Rev 2 of screen compiler
Kelly,
I have been thinking about that same thing. Thanks to some of our kind
list mates, I have received a large number of the past SOD's that I have
been using for testing (New release later today...how's that for a
teaser!). Since the M has been back for a while, I think that going back
six months would be reasonable.
I have also noticed that there only seems to be about 5 or 6 different
screens of the day, and that they get rerun with the latest data . That
being the case, I suppose someone could place all of the same "type" of
screens in their own directory, and then run the compiler on that
directory. Therefore, you could end up seeing which, if any companies
showed up on the Overall best ratings screen over the last 6 months, for
example.
Having said that , I can see a need in later releases for the ability to
drill down in subdirectories, or only use the files in that
directory.....
my 2 cents worth
Mike
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
"Kelly Short"
<kelly.short@neoris.co To:
canslim@lists.xmission.com
m> cc:
Sent by: Subject: RE:
[CANSLIM] Rev 2 of screen compiler
owner-canslim@lists.xm
ission.com
07/19/2002 08:56 AM
Please respond to
canslim
Mike and statisticians in the group,
Do you think there is a limit to how far back you should go with the IBD
Screens of the Day for the screen compiler Mike has created? I'm not a
statisticians but it seems that using (for example) SOD's (Screen of the
Days) from the past year could produce skewed results- conditions might
have changed in the market to make the high flyers look like today's
dogs and you could be reviewing SOD's from different market conditions.
However, companies that continually show up on the SOD (regardless of
time period) would seem to offer stability and opportunity regardless of
market condition. Thoughts anyone?
Kelly
- -----Original Message-----
From: michael_niemotka@baxter.com [mailto:michael_niemotka@baxter.com]
Sent: Thursday, July 18, 2002 8:38 AM
To: canslim@lists.xmission.com
Subject: RE: [CANSLIM] Rev 2 of screen compiler
I created some macros in an excel spreadsheet that will compile a master
list of the screens of the day (SOD) from investors.com. You can search
old messages for the details.
Mike
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
"Lonnie Brauner"
<lonnie@hal-pc.org> To:
canslim@lists.xmission.com
Sent by: cc:
owner-canslim@lists.xm Subject: RE:
[CANSLIM] Rev 2 of screen compiler
ission.com
07/17/2002 05:00 PM
Please respond to
canslim
Mike,
Sorry to have missed the discussion on your screenfiles. What is the
purpose of it? Lonnie
- -----Original Message-----
From: owner-canslim@lists.xmission.com
[mailto:owner-canslim@lists.xmission.com] On Behalf Of
michael_niemotka@baxter.com
Sent: Wednesday, July 17, 2002 2:19 PM
To: canslim@lists.xmission.com
Subject: Re: [CANSLIM] Rev 2 of screen compiler
Billy,
No problem. I am working on a new version right now.....I'll post it up
when it is complete.
Mike
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
billy.hare@arrisi.com
Sent by: To:
canslim@lists.xmission.com
owner-canslim@lists.xm cc:
ission.com Subject: Re:
[CANSLIM] Rev 2 of screen compiler
07/17/2002 02:14 PM
Please respond to
canslim
Mike,
I had the same problem with version 2 and tracked it down to a few
files. See attached.
Great tool! I was able to use it by simply removing the faulty files.
Thanks,
Billy
michael_niemotka@baxter.com
Sent by: To:
owner-canslim@lists.xmission. canslim@lists.xmission.com
com cc:
Subject: Re: [CANSLIM]
Rev 2 of screen compiler
07/09/02 11:18 AM
Please respond to canslim
Rich,
Would it be possible for you to zip up all your screens of the day and
send them to me so I can try to debugg it? I am wondering if it is
possible that the format of the files downloaded from IBD has changed
slightly, and that might be causing the problem
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
"Rich W"
<rich1334@brick.net> To:
canslim@lists.xmission.com
Sent by: cc:
owner-canslim@lists.xm Subject: Re:
[CANSLIM]
Rev 2 of screen compiler
ission.com
07/08/2002 07:46 PM
Please respond to
canslim
Mike,
I have Out look Express, but was able to down load and save file in .zip
format opened it and ran it, seems something is wrong
Got this Error "run-time error 1004" "select method of range class
failer"
also got a new file "composite.xls" with 5 tabs at bottom, which are May
1, 6, 7, 8, & 9 On the screencomplier I got RS but Column C & D are
blank, so now not sure what to do next I do have a lot of screen files,
starting from 3/15, have every one to today 7/8 I did try this more than
once, same thing, thanks if you can help me, as not very good with
macro's, which I think is where the problem may be, and not able to know
how to fix.
Rich Weinhold
636-240-7267
AAII CISIG Group.
STL Stock Analysis
Group Coordinator
- ----- Original Message -----
From: <michael_niemotka@baxter.com>
To: <canslim@lists.xmission.com>
Sent: Monday, July 08, 2002 3:19 PM
Subject: [CANSLIM] Rev 2 of screen compiler
Hi all
Attached is version 2 of the screener compiler. In this version, the RS
ratings for each stock are taken from each individual file , and placed
on the master sheet.
When the clean up of the list is done, the highest RS value (if it
exists)
for each stock is the one that gets saved.
Let me know how it works.
Mike
(See attached file: screenercompiler2.0.zip)
Mike Niemotka , PE
Sr. Principal Engineer
Baxter Healthcare Corporation
Route 120 & Wilson Road
Round Lake, IL 60073
Tel (847) 270-4075
Fax (847) 270-4525
michael_niemotka@baxter.com
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
(See attached file: screenfiles.ZIP)
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
________________________________________________________________________
____
For your protection, this e-mail message has been scanned for viruses.
Visit us at http://www.neoris.com/
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
- -
- -To subscribe/unsubscribe, email "majordomo@xmission.com"
- -In the email body, write "subscribe canslim" or
- -"unsubscribe canslim". Do not use quotes in your email.
Previous Article (by Subject): RE: [CANSLIM] Rev 2 of screen compiler michael_niemotka@baxter.com
Articles sorted by: [Date]
[Author]
[Subject]