Integrated Tooling Press The side load press utilizes welded upper and lower bolster construction Welded bolsters are joined together on the back side by a rigid rib construction The upper bolster is supported on the front side with threaded rod assemblies at the corner locations The press is intentionally designed to have a more defined fixed daylight with further dedication to tools of the same size in all directions. (Daylight can be adjusted if need arises at some future point) Very suitable for production, where tooling thicknesses do not vary Advantages: Dedicated fixed daylight for dedicated tooling in production Tooling positioned on guides attached to press for easy transfer in and out of platen area. Guides will easily accept any tooling with the same dimensional criteria in all directions Tool travel distance is reduced Tolerances: Flatness, +/- .13 mm maximum Deflection, .25-.5 mm Disadvantages: Can only accept narrow tooling Tooling length may be restricted Daylight not as easily adjustable Contact presses@radiuseng.com for more details       Radius Engineering Inc. 1042 West 2780 South, Salt Lake City, Utah 84119