|
|
| |
| Welded
Bolster Construction |
|
|
|
- The Welded Bolster Construction
uses flat steel plate with rib construction
on both the upper and lower bolsters.
- Threaded rods or screw jack
assemblies connect the upper and lower bolsters.
- Welded Bolster Construction
can accept Mechanically Adjustable Daylight
actuation
- Very suitable for low rate
or development production, where tooling
thicknesses vary
- Advantages:
- Meets aerospace flatness
and deflection tolerances
- Tolerances:
- Flatness, +/- .13 mm
maximum
- Deflection, .25-.5
mm across typical Bolster press widths
(1500-2000 mm)
- Disadvantages:
- Higher cost than C-Channel
Presses
Contact presses@radiuseng.com
for more details |
|
|
| |
|
|
| |
|
Radius Engineering Inc.
1042 West 2780 South, Salt Lake City, Utah 84119
|
|
|
