Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Welcome to the largest and oldest Pinball Parts Wanted page on the
Internet. All entries are sorted in order by date of post, with most recent
listed first.
If you need hard-to-find parts fill out
this form and your entry will be added to this page. This is completely FREE!
In need of 1955 Gottlieb "Wishing Well" playfield plastics. Reproduction or NOS. Text picture and price.
Contact:
Ernest Gabbard
voice: 513-739-2945
1415 Ocean Shore Blvd.
Ormond Beach, FL 32176
Posted: 25 September 2024
Looking for a set of the red painted metal flippers that Williams used on such games as River Boat and Heat Wave.
Contact:
Glen Peters
voice: (714) 745-1783
So. Cal
Posted: 22 September 2024
I need a source for a set of plastics with game specific artwork for a 1974 Gottlieb FAR OUT. They can be origionals (non-broken) or repros.
Contact:
Steve Larson
Eatonton, GA
Posted: 20 September 2024
1950 Exhibit BE BOP. Need two of the rectangular metal flaps from the reset bank that rotate when the coil is activated and subsequently open/close the attached switches. Have pictures.
Contact:
Dale
voice: 509 994 0328 (accepts texts)
4309 E Willow Springs Road
Spokane, WA 99223
Posted: 19 September 2024
Searching for an original, unbroken, tan-colored Williams plastic shooter housing (with W logo) for 1972 SWINGER. Just need the housing. Also still looking for score and instruction cards for Gottlieb 1972 WORLD SERIES add-a-ball. Originals preferred but will take good quality copies.
Contact:
Bob Thurman
voice: 516-354-7737 (accepts texts)
Long Island, NY
Posted: 18 September 2024
Wanted: Charlie's Angels playfield solid state version, NOS preferred, or very nice. Also need p/f plastics.
Contact:
Ernie Liffers
voice: 770 889-3000 (accepts texts)
2150 Pilgrim Mill Circle
Cumming, GA 30041
Posted: 17 September 2024
Looking for a set of Data East Star Wars Death Star speaker grilles.
Contact:
Matt
Windsor, Ontario Canada
Posted: 16 September 2024
Looking for Pinball machine PROMOS, KEYCHAINS (aka 'KEY FOBS') and other factory original promotional items from inside the 'Goodie Bags' often found inside coin boxes or stapled inside the cabinets of new pinball machines. Ideally interested in TRADES but will BUY collections of items I don't have. I am a Collector and do not sell these. Goodie Bags usually contain spare parts like bulbs, drop target stickers, fuses and small rubber rings but I'm only interested in the game specific plastic Promos or Keychains.
Contact:
Dangerdann
Scottsdale, AZ 85254
Posted: 3 September 2024
**SELL ME YOUR FLYERS**
Have CASH and WANT to BUY - Uncommon or unique PINBALL FLYERS 1932-2024 and from any country.
I will also BUY pre-1986 Flyers for ARCADE, bowler/shuffle alley and video games.
I will buy ENTIRE COLLECTIONS or individual flyers - TOP PRICES paid for flyers ESPECIALLY for ones that I don't have yet. Send me a list OR photos/video of what you have available.
I also have over 8,500 SPARE pinball flyers and 3,500 spare arcade available for sale or trade in a DETAILED spreadsheet (.xlsx) with condition and prices listed - email me if you are interested in the list. I'm a collector and NOT a dealer. I'm flexible or sales/trades and easy to communicate with - having completed over 1,600 deals in the past 25 years in the pinball community worldwide.
Contact:
Mike Minchew
Plano, TX
Posted: 2 September 2024
Looking for a photo of the fuse block in a Zaccaria COMBAT...somone peplaced it but I'm not sure if they wired it correct.
Contact:
Rod
Yamhill
Posted: 31 August 2024
1965 Williams BIG CHIEF plastics set wanted.
Contact:
Jay Nalaschi
Pittston, PA 18640
Posted: 27 August 2024
Looking for CPR High Speed reproduction playfield gold, silver or bronze (silk screened)
Contact:
Ken White
voice: 650-400-0207
Burlingame, CA
Posted: 24 August 2024
Looking for NOS Bally Hot Doggin playfield.
Contact:
Ken White
voice: 650-400-0207
Burlingame, CA
Posted: 23 August 2024
1956 Gottlieb Rainbow - looking for a ball lift push rod assembly B-3924 or specifically the metal bushing A-3922 and the spring A-3921.
This game also needs a coin return turnaround B-4395, coin feed trough B-4391, coin feed trough cover B-4392, and a coin return trough A-4417.
All the parts listed here are missing on this game.
Any help in locating any or all the parts is much appreciated!
Contact:
Kevin Woods
voice: 775-203-0950 (accepts texts)
5260 Challis Cir.
Reno, NV 89523
Posted: 19 August 2024
1972 Bally FIREBALL backglass
Contact:
Hjtuii886
1060 Sampson Street
Denver, CO 80222
Posted: 7 August 2024
Looking for new old stock Bally FUTURE SPA playfield.
Contact:
Ken White
voice: 650-400-0207
CA 94401
Posted: 31 July 2024
Looking for a backglass to 1960 Williams '21'.
Contact:
Ben
voice: phone, fax: 727 687 1818
Florida
Posted: 27 July 2024
Looking for parts for a 1977 Zaccaria (Combat) pinball. Need the pop bumper light circuit board that has a small jones plug on the bottom of the playfield.
Contact:
Rod
McMinnville, OR
Posted: 14 July 2024
UPDATED AD for July: Still looking for a set of score and instruction cards for my Gottlieb 1972 WORLD SERIES add-a-ball wedgehead. Originals in mint/excellent condition preferred but will consider originals with wear and/or copies. Also, for a Williams HIGH SPEED: one of the seven-digit alpha-numeric slave displays, COMPLETE (PC board and glass) and ready to plug in. For some unknown reason, it is missing from the 2nd player. Please include pictures of what you have in your reply email.
Contact:
Bob Thurman
voice: 516-354-7737
Long Island, NY
Posted: 12 July 2024
Need a good drop target from a 1974 Chicago Coin "Hi Flyer" or "Sky Rider" as they are the same design. Reply with condition and price.
Contact:
Joe Ruell
Eagle Point, Oregon
Posted: 4 July 2024
Looking for the following parts:
Legs:
Need a set of wood legs for a Williams "Regatta" [1955]. The wood legs for Regatta bolt to the side of the machine and not the corners. [pics available].
Plastics wanted:
Gottlieb "Frontiersman" [1955] Complete set,
Bally "Rocket III" [1967] The upper plastic,
Williams "Vagabond" [1962] Complete set,
Williams "Disk Jockey" [1952] Right side, upper plastic.
Bally Playfield upper arch (Lime Green) for a "Rocket III" (1967) [Capersville fits also] .
Internal "Motor Board" for a Gottlieb "Shindig" (1953) [the board with score motor and transformer mounted],
The following playfields (in good or better condition) that I'm looking for can be populated or not.....
Playfield for Gottlieb "Super Score" or "Hi Score" (1967),
Playfield for Gottlieb "Classy Bowler" (1956),
Playfield for Gottlieb "Domino" [1968],
Playfield for Gottlieb "High Hand" [1973],
Playfield for Gottlieb "Royal Guard" [1968].
Any Gottlieb Wedgehead Light Box [Head], [with insert]. Game title does not matter, as I just need the parts for a future project.
Williams (1962-1965) Lock Down Bar Receiver. The receiver has the lever mounted which pivots to release/secure the lockdown bar.
United "Pinch Hitter" [1949] playfield light caps,
I've got 3 machines, for which I've got the Light Box (Head) but the cabinet is gone. So, I'm looking for a
complete cabinet (and playfield) for:
Gottlieb "Astro" [1971],
Gottlieb "Dimension" [1971].
I've got several machines, for which I've got the cabinet but the light box (Head) is gone. So, I'm looking for a
complete light box (Backglass is optional) for:
Williams "21" [1960],
Gottlieb "Sunshine" [1958],
Gottlieb "Stock Car" [1970],
Gottlieb "Pin Wheel" [1953].
Early 50s Gottlieb Wood coin door (complete), size needed is 11 1/4" x 5 1/2". I need one with, and without the hinge.
Note: I'll be at the Allentown Pinfest in May 2025 (Friday only).
Contact:
Chris Andrews
Holton, Michigan
Posted: 25 June 2024
I am looking for several items & parts for my newly acquired EM pin-Love Bug-by Williams. I need:
1) The names of the colors/color codes that you used to refinish the cabinet of your "Love Bug" or "Doodle Bug"; or if you didn't repaint yours, if you know what colors were used.
2) If you still have your stencil kit you used to repaint your cabinet, I would like to buy it if you're selling. Just trying to save a few dollars over a new one
3) Possibly a fully populated coin door with coin mechs in place; so I can drop a quarter or whatever to play a game.
Any parts you are willing to sell need to be carded, using a 3x5 card with your name & the date you responded to my ad. I may not respond to your reply if you don't do this. This cuts down on scam sellers & I hope you understand.
Contact:
Kenneth Robinson
voice: 315-335-9985 (accepts texts)
26 Lower Woods Road North
Utica, NY 13501
Posted: 24 June 2024
Would like to locate a Bally Spy Hunter pinball playfield. Prefer N.O.S. until I do find one, the old one will be just fine.
Contact:
Dan Tiemeyer
voice: 316-350-0808
Wichita, Kansas 67218
Posted: 13 June 2024
Looking for a set of Williams Cosmic Gunfight sling plastics. I would buy the whole set if need be.
Contact:
Robert G
voice: 716-523-5570 (accepts texts)
Buffalo, NY 14092
Posted: 12 June 2024
Looking for non-functioning Williams System 9 & 11 MPU boards.
Willing to pay $$.
Please be able to support your replies with current detailed pictures to verify board condition.
Scammers, do not waste my time.
Please reply with board type, condition and asking price.
Pictures will also be requested.
Contact:
Jay
Posted: 23 May 2024
Looking for an original playfield for a 1960 Williams OFFICIAL BASEBALL (pitch & bat) game with the mechanical men, playfield only.
Contact:
Chuck
voice: 905-580-7739
Hamilton, Ontario Canada
Posted: 18 May 2024
Looking for non-functioning Williams System 9 & 11 MPU boards.
Willing to pay $$.
Please be able to support your replies with current detailed pictures to verify board condition.
Scammers, do not waste my time.
Please reply with board type, condition and asking price.
Pictures will also be requested.
Contact:
Jay
Posted: 15 May 2024
LTB:
Bram Stokers Dracula ramps, complete set or individuals.
MSF Creature parts
Sega cabinet armor with button protector
Williams cabinet armor with button protector
Contact:
Cody
Posted: 14 May 2024
Dixie 1940 Chicago Coin manual and schematic. Please. Helpful would be a clear pic of inside of the backbox.
Contact:
Mike Rimkus
voice: 814-673-2303 (accepts texts)
Utica, PA 16362
Posted: 10 May 2024
Looking for a Backglass for Bally Future Spa
Contact:
Kenny White
voice: 650 400 0207
CA
Posted: 3 May 2024
Actuator - relay leaf switch 6, 7, 8 position
This is for the score motor switch stacks on a 1969 Bally Joust. I need one each of the following
C-769-3 flat bottom 6 slots
C-769-4 flat bottom 7 slots
C-769 flat bottom 8 slots
Contact:
Jason Kngiht
voice: 801-380-6306 (accepts texts)
Posted: 24 April 2024
Olympic Hockey (Williams) I need the hockey puck band or the metal that I can cut to make one from.
Contact:
Marvin Giesting
Posted: 18 April 2024
Looking for New Old Stock Bally Fireball 2 playfield.
Contact:
Kenny White
voice: 650-400-0207
San Mateo, CA
Posted: 12 April 2024
Looking for playfield plastics for my Bally Little Joe
Contact:
Jim Myhers
1030 San Francisco Way
Rohnert Park, CA 94928
Posted: 10 April 2024
Looking to buy a backglass for a 1966 Bally "Campus Queen" pinball.
English language version only, and in good condition.
Prefer not to ship. If you are going to be attending Pintastic or Pinfest, I can pick it up from you there.
Contact:
Joe
New York
Posted: 15 March 2024
1971 Williams Jackpot/Goldrush/Klondike.
Looking for the domed slot reel plastic cover common to those machines. Any condition is fine as long as it's not cracked or broken.
Contact:
Kurt
voice: 563-210-0049 (accepts texts)
Posted: 13 March 2024
Novelty Merchantman by Exhibit Supply parts needed.
The large, rectangular faceplate on the front of the cabinet.
The metal molding situated just below the faceplate.
Contact:
Marvin Giesting
Connersville, Indiana
Posted: 13 March 2024
WTB--NOS Cherry dot matrix display.
Contact:
Gary Stuart
voice: 214-566-5226
620 Meadowlark
Ovilla, TX 75154-3610
Posted: 12 March 2024
Looking for soundboard for a 1986 Williams ROAD KINGS, D-11197-542, working or not. Let me know.
Contact:
Gerry
voice: 484-529-7441 (accepts texts)
Morgantown, PA
Posted: 2 March 2024
Wanted
Complete sets - Gottlieb playfield plastics for:
1957 Continental Cafe
1957 Flag Ship
(Mine are toast)
Need full sets - New(repro), used or good color pictures to make them.
Will pay for your efforts to scan them if you have them.
Contact:
Jim Southwelll
voice: 864-593-8321
4 Purdue Ct
Mauldin, SC 29662
Posted: 20 February 2024
Wanted: The HOLD relay and coil for a 1969 Bally Cosmos. I suspect other close years would also work.
Contact:
Jeff
voice: 732-778-5528
Posted: 2 February 2024
Looking for a lower apron for my Bally Surfers.
It's the lime green version.
Contact:
Pete Best
voice: 435-668-9669
1316 South 400 East
St George, UT 84790
Posted: 23 January 2024
1982 Bally Mr. and Mrs. Pac-man ball shooter gauge.
Contact:
Chris Kay
Posted: 19 January 2024
Looking for smaller translite for T3 part number 830-5279-00
Contact:
Ken White
voice: 650-400-0207
Posted: 5 January 2024
Gottlieb Classy Bowler 1956 playfield plastics wanted.
Contact:
Tony Mather
Posted: 4 January 2024
Looking for a Stern Terminator 3 (T3) new old stock playfield
Contact:
Ken White
voice: 650-400-0207
San Mateo, CA
Posted: 2 January 2024
I am interested for Playfield Plastics for all pinball machines NEW and USED
Regards
Merry Christmas and Happy New Year 2024.
Contact:
George Dracos
Leontioy A' 234
Limassol, Cyprus 3020
Posted: 28 December 2023
I am interested for playfield Plastics, and Gottlieb pinball boards System 1 and System 80.
Contact:
George Dracos
voice: 0035799661160
Leontiou A' 234
Limassol 3020
Posted: 26 December 2023
Looking for a used, unpopulated playfield that is in structurally good shape (no warping, planking, etc.) for Game Plan Old Coney Island!. This is to be totally reconditioned by an artist, so the playfield can be rough, and I don't want to break up my current pin for that. I wouldn't mind a populated one if it's something that I could pick up myself. Would be nice to be within a round-trip day's driving distance from New Orleans or Memphis.
Contact:
Jean
Posted: 14 December 2023
Wanted: Period Front door for a Gottlieb 1950 Knockout. This is the style that has no hinges. Also, looking for the referee that stands in the boxing ring with the two boxers. Or the whole unit - 2 boxers plus the referee.
Finally, I'm after the round metal piece on the front door where you put your coin in.
Thanks in advance for any help or suggestions how to source these parts.
Contact:
Mark Jackson
voice: 040-172-7926
10 Knight Close
Ourimbah, NSW 2258 Australia
Posted: 1 December 2023
Looking for a Williams Star Pool backglass in decent condition.
Let me know what you may have.
Contact:
Jay
Caroline
Irwin, PA 25642
Posted: 24 November 2023
WANTED: I'm in need of the Electronic Circut board, that goes on the Triple Play Unit located in the bottom cabinet of a Bally London Bingo Pinball. It's the small removable board that has all the transistors and resistors on it.
Contact:
Gary Conway
voice: 360-473-7104
Silverdale 98383
Posted: 24 November 2023
Looking for BALLY EM stuff. Willing to pay for shipping of course. I'm in need of: yellow lower apron for Bally EM, green lower apron for Bally EM. Bally Joust, complete game or parts. Bally Surfers plastics.
Feel free to call/text.
Contact:
Pete Best
voice: 435-668-9669
Posted: 23 November 2023
Wanted: 1960s 3-reel Gottlieb score reel bracket. I don't need the score reels, just need the bracket. The nylon guides on the bracket must be free of breaks and/or cracks.
Contact:
Mark
Bozeman, MT
Posted: 22 November 2023
I am in need of a 1995 Gottlieb Waterworld cannon and gunner assembly or even just the #31661 ramp.
Contact:
Ernest Gabbard
voice: 513-739-2945 (accepts texts)
1415m Ocean Shore Blvd.
Ormond Beach, FL 32176
Posted: 21 November 2023
Looking for a Williams Star Pool backglass in decent condition.
Let me know what you may have.
Contact:
Jay
Caroline
Irwin, PA 25642
Posted: 17 November 2023
1955 United big ball bowler wood leg.
Contact:
Mark Anderson
voice: 612-822-9783
4908 10th Ave S
Minneapolis, MN 55417
Posted: 10 November 2023
1969 Bally ON BEAM, looking for the backglass.
Contact:
Mark Anderson
voice: 612-822-9783
4908 10th Ave S
Minneapolis, MN 55417
Posted: 10 November 2023
Looking for a backglass for 1976 Bally FREEDOM electro mechanical.
Contact:
Mark Anderson
voice: 612-822-9783
4908 10th Ave S
Minneapolis, MN 55417
Posted: 10 November 2023
Looking for an Apollo 13 pinball Apron. Let me know what you have.
Contact:
Mike
Brandywine, Maryland 20613
Posted: 10 November 2023
Looking for playfield plastics for Stern SPLIT SECOND.
Contact:
Mark Anderson
voice: 612-822-9783
4908 10th Ave S
Minneapolis, MN 55417
Posted: 10 November 2023
1958 Gottlieb Roto Pool playfield plastics....either repro or original in nice shape...partial or full set.
Contact:
Steve Curchin
voice: 1-519-322-8455 (accepts texts)
347 Erie St South
Leamington, Ontario N8H 3E1 Canada
Posted: 14 October 2023
This information is current as of October 8, 2024 4:42:01 MDT
© Copyright Mr. Pinball 2024. All Rights Reserved.