Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Brought to you by
Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Welcome to the largest and oldest Pinball Parts Wanted page on the
Internet. All entries are sorted in order by date of post, with most recent
listed first.
If you need hard-to-find parts fill out
this form and your entry will be added to this page. This is completely FREE!
Looking for parts for a 1994 Bally Corvette, I have a machine that is a reimport and missing lots of playfield parts like all wireforms, LT5 engine brackets and coils, engine driver board in head, translite, ramps, and handful of other plastics.
Please let me know what used parts or NOS you have.
Contact:
Brian
WI
Posted: 17 November 2018
Wanted--1951 Gottlieb Mermaid playfield
I am searching for a nice playfield or a new repro from CPR.
Contact:
Robert Koss
Posted: 14 November 2018
Wanted, No Good Gophers Bud and Buzz figures
Contact:
Tom Test
21742
Posted: 13 November 2018
1980 Stern Seawitch Lockdown bar wanted.
Contact:
Leon Moncla
voice: 409-658-6381
390 Junker Rd.
Beaumont, TX 77707
Posted: 11 November 2018
CUE BALL WIZARD PLASTIC PIECES NEEDED.
1. Most importantly the clear plastic piece that holds the 8 ball above the playfield.
2. The red plastic on top of the horseshoe shot.
3. The red ramp.
Contact:
Eric Jackson
voice: 314-761-7580
645 Osage Lake Drive
Cedar Hill, MO 63016
Posted: 10 November 2018
I am looking for a 1975 Williams PAT HAND backglass and any Pat Hand parts
Contact:
Robert
Posted: 10 November 2018
Plastics for 197l Bally MARINER.
Contact:
Doug
voice: 734 7l8 5039
Posted: 10 November 2018
Wanted original metal backdoors for a Gottlieb Fun Land wedge head
Also for a Bally Hi Deal. Both single player games
Lock not needed. Price and shipping to Eugene, Oregon.
Contact:
Chris Nash
voice: 503-969-1754
.
Eugene, Oregon 97402
Posted: 10 November 2018
WTB: Sega Gun Fight Coil.
Looking for a step up coil used in the score stepper unit on a Sega Gun Fight EM arcade game. Either the coil or entire stepper unit would be useful. Also any other parts for this game.
Contact:
Derek
Posted: 10 November 2018
WTB: 1961 Gottlieb Lancers Backglass.
Does not have to be perfect.
Prefer a sealed backglass.
Contact:
Bob Cobb
Bowling Green, KY
Posted: 9 November 2018
Looking for the following parts:
Complete set of plastics for a Gottleib "Sky-Line" [1965],
The upper left plastic behind the drop targets (B-14956) for a Gottlieb "Big Indian" or "Big Brave",
The right slingshot (Lower right) plastic for a Gottlieb "300" or "Top Score" [1975],
The Roulette wheel plastic cover for a Williams "Suspense" [1969],
The upper right plastic for a Gottlieb "Airport" [1969],
The plastic behind the upper row of targets for a Gottlieb "Royal Flush" or "Card Whiz" [1976],
Complete set of plastics for a Gottleib "Jungle" or "Wild Life" [1972], or "Jungle King" [1973],
The middle plastic (above the 3 of Clubs) for a Gottlieb "Flip A Card" [1970],
The upper right plastic for a Gottlieb "Soccer" or "Super Soccer" [1975].
Metal Light Box Door for a Williams "Smart Set" [1969], dimensions are 27 7/8" wide by 25 3/4" tall,
Metal Light Box Door (inverted type) for a Gottlieb "Dancing Dolls" [1960], dimensions are 21 1/16" wide by 26 3/8" tall,
Early 50s Gottlieb Wood coin door (complete),
The following playfields (in good or better condition) that I'm looking for can be populated or not.....
Playfield for Gottlieb "Magnotron" or "Duotron" [1974],
Playfield for Gottlieb "Domino" [1968],
Playfield for Gottlieb "High Hand" [1973],
Playfield for Gottlieb "Target Alpha" [1976],
Playfield for Gottlieb "Royal Guard" [1968].
Several Coin Mech Coin Acceptors in Nickel denomination.
Motor Board for a Gottlieb "Target Alpha" [1976],
Gottlieb Wedge head back door, standard and inverted,
I've got 2 machines, for which I've got the Light Box but the cabinet is gone. So, I'm looking for a
complete cabinet (and playfield) for:
Gottlieb "Gold Strike" [1975],
Williams "Vagabond" [1962].
I've got 4 machines, for which I've got the cabinet but the light box is gone. So, I'm looking for a
complete light box (Backglass is optional) for:
Gottlieb "Stock Car" [1969],
Gottlieb "Jungle King" [1973],
Gottlieb "Pin Wheel" [1953],
Gottlieb "Big Indian" [1974].
I only do PayPal for payment.
Pick up is possible at Allentown next May, if you're going (I plan ahead!)
Contact:
Chris Andrews
Holton, Michigan
Posted: 8 November 2018
Wanted 1978 Bally Strikes and Spares Playfield. Looking for one with minimal wear. Willing to pick up at Pinfest this spring. Email or text.
Contact:
Thomas Drum
voice: 8148801333
Port Matilda, PA 16870
Posted: 7 November 2018
Plastics for 62 Trade Winds
Contact:
Doug
voice: 734 7l8 5039, fax: none
Miller
Ann Arbor, MI 4l083
Posted: 6 November 2018
Williams System 3 - 7
3-Bank drop target assembly
Need two units
Contact:
Cody Chunn
Posted: 6 November 2018
backglass for 74 Bally Big Show
Playfield glass lock down bar and receiver for a Twilight Zone (or compatable)
Contact:
Frank Sansone
Manchester Township, NJ 08759
Posted: 4 November 2018
Bally Eight Ball playfield needed. Looking for a nice used example. Would also consider buying a whole non-working game with an excellent playfield. Call, text or email.
Contact:
Thomas Drum
voice: 814-880-1333
Port Matilda, PA 16870
Posted: 4 November 2018
Bally Strikes and Spares playfield needed. Looking for a nice used example. Would also consider buying a whole non-working game with an excellent playfield. Call, text or email.
Contact:
Thomas Drum
voice: 814-880-1333
Port Matilda, Pennsylvania 16870
Posted: 4 November 2018
Looking for a Gottlieb El Dorado City of Gold backglass or translite. Let me know if you have one for sale.
Contact:
Dave Ruch
Fresno, CA 93720
Posted: 3 November 2018
Pinball flyers wanted -
Capcom Airborne German
Zaccaria Hot Wheels English
Contact:
Klaus
Friedberger Str,. 38
Rosbach, Deutschland 61191
Posted: 3 November 2018
Alien Poker pop bumper cap decals. Looking for a set or maybe you know someone that can make them.
Contact:
Doug Huse
Posted: 1 November 2018
Chicago Coin Gin pinball backglass.
Let me know what you have.
Contact:
Brian
Maine
Posted: 31 October 2018
Wanted--Any playfields, $20 to $80
Contact:
Doug
voice: 734 7l8 5039, fax: none
Miller
Ann Arbor, MI 48l03
Posted: 30 October 2018
Wanted to trade--I have a new sealed set of CPR Defender playfield plastics. Would like to trade for a sealed set of CPR Alien Poker playfield plastics!
Contact:
Doug
CT 06776
Posted: 29 October 2018
1962 Gottlieb Rack-a-Ball Backbox Balls
Looking for the red and white balls. Condition must be serviceable but not required to be new. Our game is currently missing balls!
Contact:
Will Bird
Pittsburgh, Pennsylvania
Posted: 28 October 2018
Frankenstein - plastics and (plastic) ramps
best would be NOS or as good as new ... offers welcome.
Contact:
Klaus
Friedberger Str,. 38
Rosbach, Deutschland 61191
Posted: 25 October 2018
Wanted Bally Harlem Globetrotters Backglass in excellent condition.
Call, email or text if you have one available.
Contact:
Gary M Cable
voice: 724-963-7210
152 N 10th St
Connellsville, PA 15425
Posted: 18 October 2018
Wanted: Gottlieb 1962 LIBERTY BELLE Backglass.
Please call, email or text if you have one available.
Contact:
Gary M Cable
voice: 724-963-7210
152 N 10th St
Connellsville, PA 15425
Posted: 18 October 2018
If I want to make the 5610-09563-00, does any one know the VA or A, watt per each volt, any technical data?
Contact:
Gil Nofar
voice: 917-300-4228
440 W 57 St
NY, NY 10019
Posted: 17 October 2018
Looking to buy transformers 56120-09563-00 coment 1986
Contact:
Gil Nofar
voice: 917-300-4228
440 W 57 St
NY, NY 10019
Posted: 17 October 2018
Need Gottlieb James Bond 007 plastic set
Contact:
Jason
Trussville, Alabama 35173
Posted: 16 October 2018
1967 Williams Touchdown Backglass
Mine is cracked and chipping looking for something in better shape.
Contact:
Curly Joe
Cleveland, OH
Posted: 14 October 2018
Looking for a repro set or a nice original set of playfield plastics for a 1963 Williams Skill Pool.
Contact:
Larry
WV
Posted: 14 October 2018
Looking for a set of Bally backbox hinges. The type used in Fathom, Centaur, Medusa or Vector.
Contact:
Jack
Cleveland, Ohio
Posted: 10 October 2018
Wanted Williams Deluxe Batting Champ backbox / head. Can pick up at York Show this weekend.
Contact:
Jim P.
voice: 717-564-1032
Near Harrisburg, PA
Posted: 10 October 2018
Backglasses Wanted.
Williams Time Warp and Gottlieb 300
New Used or Repop O K
Must be decent. Please No fading or peeling.
E-mail with Price and condition to Eugene Oregon 97402.
Contact:
Chris Nash
voice: 503-969-1754
Eugene, Oregon 97402
Posted: 8 October 2018
Wanted: Williams Casanova Backglass
I have backglass for my EM 1966 Williams Casanova and it's in excellent shape but some paint has peeled away. Want one that's in better condition.
Thank you in advance.
Contact:
Curly Joe
7334 Hodgson Rd
Mentor, Ohio 44060
Posted: 7 October 2018
Wanted: Pop Bumper Cap
I need a Williams Touchdown pinball Pop Bumper Cap "Advance When Lit" cover. It is green and white and 2" diameter to cover.
Contact:
Curly Joe
Posted: 6 October 2018
Looking for a good backglass for a Bally Power Play
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 3 October 2018
Wanted: Williams Casanova Backglass
I have backglass for my EM 1966 Williams Casanova and it's in excellent shape but some paint has peeled away. Want one that's in better condition.
Thank you in advance.
Contact:
Curly Joe
7334 Hodgson Rd
Mentor, OH 44060
Posted: 1 October 2018
Wanted: Pop Bumper Cap
I need a Williams Touchdown Pinball Pop Bumper Cap "Advance When Lit" cover. It is green and white and 2" diameter to cover. Thank you in advance.
Contact:
Curly Joe
7334 Hodgson Rd
Mentor, OH 44060
Posted: 30 September 2018
Will be attending the White Rose Pinball show in York. Looking for a Gottllieb "Card Trix" backglass in very good condition. Should have no or minimal flaking. Send reply with price and pictures. Will pick up at the show or by mail.
Contact:
Frank
New York 12533
Posted: 29 September 2018
Does anyone have a backglass for a Williams Jive Time or Rock and Roll machine. Also I am looking for one for a United Summertime. And one for a 1963 WMS Big Deal.
Contact:
Mike Rimkus
voice: 814-673-2303
1882 Grant St
Utica, PA 16362
Posted: 26 September 2018
1969 - Midway - Sea Raider - metal coin box
I am in need of a metal coin box for my 1969 Sea Raider game. It looks like there may have also been a cover as there are two grooves in the wood on each side of the box area.
This is my first game so I am not sure what should be there.
I can send dimensions and picture of coin box area.
Contact:
Michael Csele
voice: 802-858-9333
20 Cilley Hill Road
Jericho, Vermont 05465
Posted: 22 September 2018
In search of a lower cabinet body for a 1958 Gottlieb Rocketship.
Contact:
J. Shetler
PA
Posted: 19 September 2018
Looking for a backglass for a Gottlieb Quartette
Contact:
Gary Brewer
NH
Posted: 18 September 2018
Looking for a nice/ok condition Bugs Bunny Birthday playfield.
Let me know price and condition.
Contact:
Brian
voice: (920) 918-1744
WI
Posted: 16 September 2018
ISO/Wanted: 1949 Keeney Band Leader schematic
Contact:
Jon Badarak
South Lyon, MI 48178
Posted: 14 September 2018
No Good Gophers Bud and Buzz figures wanted
Contact:
Tom
Hagerstown, MD 21742
Posted: 14 September 2018
1970s Bally EM "2-Coin Unit" and complete coin door. Door condition not important as long as all the coin mechs are there, preferably for quarters only.
Contact:
John Polizzotto
Lake City, Pennsylvania 16423
Posted: 9 September 2018
Wanted: Gottlieb Wedgehead back box rear metal cover door. Shipping to either Houston TX or London UK.
Contact:
Paul Richards
UK But Also Have A Houston TX Address
Posted: 7 September 2018
Backglass: 1955 Williams "CAN CAN"
Found a machine with no backglass.
Almost any condition will work or good photos of front and rear would help make a recreation.
Contact:
Tom Speidel
voice: 386-673-5121
Daytona Beach, FL
Posted: 6 September 2018
Wanted Bally Elvira and the Party Monsters, 1989
Clear Coffin cover. Everyone seems to be out of stock.
Mine is not even repairable
Any help would be appreciated.
Price and shipping to 97402
Contact:
Chris Nash
voice: 503-969-1754
Eugene, Oregon 97402
Posted: 2 September 2018
1963 TomTom backglass, minor imperfections ok.
Contact:
Luc
Salmon Arm, BC V1E2W2 Canada
Posted: 27 August 2018
WTB a used working or non-working Williams System 11A or 11B MPU. Please no battery damaged boards. Can pick up at the York show, or will have it shipped. Let me know what you have available?
Contact:
Richard Huhra
fax: 443-797-9012
Bel Air, MD 21014
Posted: 27 August 2018
Looking for a Williams 1975 Little Chief Kickback hole plastic cover
Contact:
Todd
Rochester Hills, MI 48307
Posted: 26 August 2018
Wanted--Data East SECRET SERVICE translite and cabinet decals. System 11 volume control
Contact:
Vance Tomlinson
voice: 0411617145
Raleigh, Nsw 2454
Posted: 26 August 2018
I am looking for a 2006 Stern Pirates of the Caribbean pinball cabinet. I would like to find both the cabinet and head but if you have either or I am happy to talk to you. It does not have to be themed PoTC but it needs to be the same era so it can be re-themed (cleaned and new decals applied).
Contact:
John
Clarkston, MI
Posted: 24 August 2018
Looking for Twilight Zone NOS plastic ramp assembly.
I am willing to pay ca$h or trade for other NOS pinball parts for various pins.
Contact:
Pinball Guy
Canada
Posted: 23 August 2018
Looking for complete or partiel plastic set for Gottlieb Monte Carlo
Any condition! Let me know what you have.
Contact:
Pierre
Montreal, Québec
Posted: 22 August 2018
I am in need of two bumper caps. The first is a yellow dome type cap with writing on it 5- Point "on" YELLOW. The second cap is somewhat the same but writing is in green. 5- Points "on" GREEN dome type. I am repairing a Gottlieb Big Casino. If anyone can help I will greatly appreciate them.
Contact:
C Winters
Posted: 20 August 2018
I recently purchased an EM Williams 1970 Straight Flush and the previous owner removed the cashbox and all the front panel components to use coins. I am looking for the parts to put it all back original. I am not sure what all I will need but my research yields the cashbox with the top and bottom metal box/lid and the two internal trays. I have the front panel but need all the components that attached to the back (2X coin slots) and the slug rejectors. If you can help I would appreciate it.
Contact:
Carl Slaughter
voice: 618-558-3376
108 Abbott Street
Bethalto, IL 62010
Posted: 19 August 2018
Looking for an NOS, or CPR playfield for a Bally Rolling Stones pinball machine.
Contact:
Steve
Jacksonville, FL
Posted: 15 August 2018
Looking for a good condition Gottlieb Vulcan backglass to UPGRADE my current glass. Very minor flaking OK, but bubbling and significant flaking won't do.
Also looking for a Harlem Globetrotters pinball machine with bad playfield. I have a clear-coated playfield ready for a swap so I mostly need the cabinet and head, board set, displays, and legs. Will buy entire machine for the right price. Would like to save a pin from the scrap heap or from being parted out!
Contact:
Tom Salvemini
voice: (774 )275-4613
23 Lamplighter Drive
Shrewsbury, MA 01545
Posted: 12 August 2018
Zaccaria, Devil Riders 1984
Need parts for Devil Riders project. Red drop target, flipper bats, metal loop at the end of shooting lane...etc. Let me know what you have because I may need it.
Contact:
Jeremy
Posted: 9 August 2018
Looking for instruction card and center gobble hole plastic for a Williams Club House. Original or even a scan would be fine. Mine are missing.
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 5 August 2018
Need 2 metal angle parts that keep the backglass from moving too far after backglass installed. They are two right angle in each back box.
Contact:
C Winters
Posted: 3 August 2018
Looking for a nice Gottlieb Liberty Belle backglass.
Contact:
Gary Cable
voice: Call or text: 724-963-7210
152 N 10th St
Connellsville, PA 15425
Posted: 1 August 2018
1985 WMS Comet pinball backglass
Contact:
Michael
voice: 203-877-0348
145 Pepes Farm Rd.
Milford, CT 06460
Posted: 31 July 2018
Looking for an un-wear Atlantis Gottlieb playfield in very good condition
Could be a reproduction.
Contact:
Jean Louis Dufloux
voice: +33629965728
242 Bis Boulevard Saint-germain
Paris, Ile DE France 75007
Posted: 29 July 2018
Looking for Bally POWER PLAY backglass. Would replace one that has missing paint so would only consider mint or near mint condition.
Contact:
Bob Thurman
voice: 516-354-7737
Long Island, NY
Posted: 29 July 2018
1962 Williams Jolly Jokers,
I need the right plate trim
The left plate trim
The top plate trim
And the bottom plate trim
That goes around the coin door
Does anyone have this to sell or know where I can purchase them?
Contact:
Larry Bloom
voice: 574 527 6174
89 Barrington Pl
Warsaw, Indiana 46582 USA
Posted: 26 July 2018
1977 Bally Mata Hari cabinet unit in working condition. Already have playfield.
Contact:
Clark Stearns
voice: 315 250 3080
11 Tyo Rd
Massena, NY 13662
Posted: 25 July 2018
Need NOS Gottlieb Worlds Fair.
Contact:
C Winters
Posted: 23 July 2018
Looking for a set of sound boards for a Chicago Coin Sharp Shooter rifle game
Contact:
Wayne Dombrowicki
voice: 920-336-7103
551 Winding Waters Way
DE Pere, WI 54115
Posted: 21 July 2018
I am in search of a set of leg bolts for my Gottlieb EM machine
I have a 1955 Gottlieb Duette Deluxe. This is the version with the wood legs and the belly lockdown bar.
I have talked with the Pinball Resource and they do not carry these bolts. Hopefully, someone out there has a set gathering dust. My bolts were lost when moving to my new house.
Contact:
Adam Breakey
voice: 919-448-5688
140 Briarfield Dr
Apex, NC 27502
Posted: 20 July 2018
Looking for a good clean complete Centaur.
Contact:
Mark Wagner
voice: 317-326-3533
285 West 200 North
Greenfield, Indiana 46140
Posted: 12 July 2018
Wanted: NOS Buck Rogers playfield.
Contact:
Ernie Liffers
voice: 770 889-3000
2150 Pilgrim Mill Circle
Cumming, Georgia 30041
Posted: 11 July 2018
NOS GORGAR playfield or mint restored
Contact:
Kenneth White
voice: 650-400-0207
Burlingame, California 94010
Posted: 8 July 2018
1967 Bally SURFERS. I am seeking to buy any playfield plastics for this game. I especially need the large plastic behind the upper flipper.
Also, I seek original bumper caps for this game with little or no bulb burn.
Third, I wish to find an original rules card.
Last, there's an optional add-a-ball relay corresponding to this game, which I seek.
WARNING TO SCAMMERS: I have been in the hobby for 30 years and I know all of the scams so scammers will be wasting their time with this want-ad.
Contact:
Bruce Zamost
voice: 609-707-4666
10 Berkshire Drive
Voorhees, NJ 08043
Posted: 5 July 2018
WTB Williams Black Knight backglass, plastics and possible playfield.
Contact:
Melissa
MA
Posted: 4 July 2018
Need a backglass for a 1940 Gottlieb "Border-Town". Any condition considered. I'd also appreciate a high resolution photo or scan of the backglass, and would pay for one.
Contact:
Joe
Posted: 27 June 2018
Looking to buy used Gottlieb or Williams daisy caps.
Contact:
Glen Peters
voice: (714) 745-1783
Posted: 24 June 2018
1992 Bally Doctor Who mini playfield parts. I am restoring a basket case Dr Who and most of the mini playfield parts are missing. I am looking for most of them, I do have the raising mech and the pf but that is about it.
Contact:
Chris Spaseff
Tempe, AZ 85283
Posted: 22 June 2018
Lawman or Sheriff playfield. Looking for one in average or better condition, populated or not.
Contact:
Christopher A Kingery
6318 46th St.ct W.
University Place, WA 98466
Posted: 19 June 2018
Need four white Williams 3A-6091A speed nut round white target faces for Williams double barrel.
Contact:
C Winters
Posted: 15 June 2018
Looking for 1986 Gottlieb Genesis slingshot plastics. Please contact me if you have some.
Contact:
Matt Martinez
voice: 559-381-1621
632 Brentwood Dr
Lemoore, CA 93245
Posted: 12 June 2018
Need a display controller board for the large Sega display part number 520-5092-01. This is used in games such as Frankenstein, Maverick, Bay Watch, and Batman Forever. Any of these will work for me. Anyone part one of these out after falling off the truck?
The alkaline batteries from the CPU board above leaked and dripped acid on the display controller board. The MPU board is okay with a new remote battery set up. The controller board is another story though. It compromised some components and the large 40 pin chip then traveled down into the e proms and sockets. It's a mess and I would simply rather replace it then try to repair it. I can burn the EPROMs if need be. This is in a Frankenstein game that I have here. Let me know.
Contact:
Tim Nabours
voice: 320-963-5953
320 Highway 55 West
Maple Lake, MN 55358
Posted: 10 June 2018
Looking for up to six white round "when lit" inserts for a Gottlieb 300 or Top Score. These measure approximately 3/4" diameter. I could get away with only replacing 3 but six would be great. I believe Gottlieb used these inserts in several games. Not looking for cupped or burnt inserts please.
Contact:
Ken Hall
Marion, Illinois 62959
Posted: 8 June 2018
1970 Williams Hit and Run baseball playfield plastic - the bottom left or both! Mine is cracked, warped is just fine.
Contact:
Pete Cooley
CC
Posted: 7 June 2018
Looking for a decent used backglass for Gottlieb Egghead.
An 8 or better original glass would be much better than what is in the game right now.
Could possibly pick up along the path between Kansas City and western/northern Michigan in the coming future.
Contact:
Mike Ostradick
Overland Park, Kansas 66210
Posted: 7 June 2018
1970 Gottlieb Scuba PLASTICS. Would love to find a good used set. Or even a new old stock but who knows? Or just singles?
Contact:
Pete Cooley
CA
Posted: 6 June 2018
1980 Bally Centaur Playfield
Looking for a CPR Playfield, any rating. Help me save my barn find.
Contact:
Marcus
CA
Posted: 5 June 2018
I need both instruction cards and scoring cards for Williams TOM TOM and Williams Double Barrel. Anything I can make a copy of for machines.
Contact:
C Winters
Posted: 4 June 2018
Looking for a backglass or scan copy translite for a Williams Triple Strike pinball.
Contact:
Brian
Sheboygan, WI USA
Posted: 31 May 2018
Main motor unit
Contact:
Jeff Morse
voice: 925-497-1796
738 Erma Ave
Stockton, California 95207
Posted: 31 May 2018
I am in need of a backglass for 1961 Gottlieb Flying Circus. Reproduction or at least one that can be restored. Also needing the large center plastic piece over the captured balls. Please contact me if you have either to sell.
Contact:
Scott Tabor
voice: (812) 449-4346
Evansville, Indiana 47601
Posted: 31 May 2018
Looking for a backglass for a 1968 Williams Lady Luck pinball. The one I currently have is in rough shape and missing a lot of paint.
Contact:
Wayne Wachter
4 Rose Street
Sayreville, New Jersey 08872
Posted: 30 May 2018
Looking for Backglass for 1966 Williams 8 Ball.
Contact:
Jim Shelton
1922 SW Tamarack
Mcminnville, Oregon 97128
Posted: 30 May 2018
Looking for a 1980 Rolling Stones backglass. Must be at or close to 100% (AKA mint).
Contact:
Tim Hoppe
voice: 651-967-6670
2929 Marine Cir
Stillwater, MN 55082-5253
Posted: 29 May 2018
ISO Cyclone cabinet graphics, stencils, reproduction artwork for a Cyclone pinball machine cabinet. To buy or trade other for other Cyclone rare items.
Contact:
Neil
Bay Village, Ohio 44140
Posted: 28 May 2018
Looking for Bally Gator or Alligator Left Sling Shot Plastic
Contact:
James
Posted: 27 May 2018
Need backglass for 1940 Gottlieb "Border-Town".
Any condition considered as I don't have one at all in my game. Would also want a scanned image file, or high resolution photo of one if you have the game.
Contact:
Joe
New York
Posted: 26 May 2018
Chicago Coin 1968 All Star Baseball backglass.
Contact:
Geoff Hamilton
Posted: 24 May 2018
1948 Gottlieb Alice in Wonderland schematic
Contact:
Michael Kapeller
Posted: 23 May 2018
Need a lockdown bar for a Williams "styling of the sixties" cabinet, specifically "Jungle". This is the type of cabinet with the tubular legs bolted directly to the bottom. Just need the lockdown bar.
Contact:
Joe
Posted: 19 May 2018
1939 Baker "TWINKLE" schematic or 1939/40 Baker "BLACK OUT" schematic.
Contact:
Jack Zega
NJ
Posted: 16 May 2018
Looking for topper fer Gottlieb Monte Carlo
Contact:
Pierre About
voice: 514-239-3391
Rosemere, Quebec J7A 1H4 Canada
Posted: 13 May 2018
Looking for heads for the following pinballs:
1951 Genco Stop and Go
1950 Gottlieb Knock Out
OK if missing backglass.
Contact:
Jim Swenson
Nederland, CO
Posted: 10 May 2018
Sure Shot backglass
Contact:
Geoff
Posted: 7 May 2018
Phantom of the Opera I'm desperately looking for a Backglass for Phantom of the Opera pinball machine.
Contact:
Johnny
voice: 424-777-5889
Sherman Oaks, CA
Posted: 5 May 2018
Looking for Backglass for United's Olympic "Shuffle Alley". I believe it produced in 1953.
Contact:
Chris Retzlaff
voice: 414-630-2178
W61n689 Mequon Ave
Cedarburg, WI 53012
Posted: 30 April 2018
Looking for Exhibit Supply rotary merchandiser for parts.
Contact:
Robert Honchark
Posted: 23 April 2018
Looking for an NOS Bally 8 Ball Playfield or a CPR reproduction. Not an Eight Ball Deluxe but 8 Ball.
Contact:
Bill
voice: 214-882-6802
Dallas, Texas 75240
Posted: 20 April 2018
Need NOS plastic set for Williams TOM TOM.
Contact:
C Winters
Posted: 18 April 2018
Earthshaker coin door
Contact:
David Greenwood
Posted: 16 April 2018
I'm chasing a No Fear translite. Needs to be in very good to excellent condition.
Contact:
Peter
Melbourne Australia
Posted: 14 April 2018
I am looking for a full set of playfield plastics for my 1982 Gottlieb Rocky pinball machine. NOS, quality used or reproductions. Also interested in a NOS Rocky playfield, or very nice used one.
Contact:
Tom Byrne
voice: 0044 7831343112
United Kingdom
Posted: 13 April 2018
I'm chasing a No Fear translite prefer NOS or something in really good condition
Contact:
Peter
Australia
Posted: 12 April 2018
I'm looking for the following stuff:
A motor board for a Gottlieb El Dorado.
A playfield for a Bally Harlem Globetrotters.
A playfield for a Gottlieb Golden Arrow.
A backglass for a Bally Amigo.
Contact:
Mark Hamilton
Orange County, CA
Posted: 12 April 2018
Williams Double Barrel need as many parts possible strating with apron and swinging target and coin trough.
Contact:
C Winters
Posted: 10 April 2018
Wanted: Gottlieb Buckaroo lower board with relays. Also, Buckaroo score motor.
Contact:
Ira
voice: 516 678 3969
101 Fairview Ave
Oceanside, NY 11572
Posted: 9 April 2018
Want NOS 1978 Playboy caps and drop targets.
Contact:
C Winters
Posted: 6 April 2018
Need Plastics for a Bally Fireball II. Could use a nice used set or what ever you have. Let me know or I can send pics of what I need.
Contact:
Ken Page
voice: 616-633-4988
8339 Childsdale Ave NE, None
Rockford, MI 49341
Posted: 2 April 2018
1978 Playboy need NOS bumper caps and drop targets.
Contact:
C Winters
Posted: 30 March 2018
1987 Williams Space Station
Looking for a playfield, doesn't need to be in perfect condition.
Contact:
Patrik
Kilstavägen
Katrineholm, Sodermanland 64194
Posted: 26 March 2018
Benchmark Ten Strike Bowling machine
After board and manequin bowler for Benchmark Ten Strike Bowling machine.
Contact:
Mike Johnson Cheetah Imports
1801 W18th St
Indianapolis, Indiana 44202
Posted: 25 March 2018
Wanted Bally bingo empty head 4 original locks and keys hold down bar square buttons need help.
Contact:
Robert Honchark
Posted: 24 March 2018
1972 Williams HONEY--Does anyone have spare parts for this pinball model? I am looking for two large plastic decors on the top of the board. That's right now what I really need.
Contact:
R. Mottier
En Châtagnis 8b
Apples, Vaud 1143
Posted: 22 March 2018
Need backglass for Gottlieb SUNSET.
Contact:
C Winters
Posted: 17 March 2018
RESCUE 911 PARTS NEEDED!
Looking for the helicopter assembly for a Rescue 911.
All above playfield parts needed including: pivot arm assembly and the turntable and motor assembly (vacuum formed helicopter and the metal frame.
Contact:
Bill Coppin
voice: 701-640-0452, text okay
Wahpeton, ND 58075
Posted: 15 March 2018
Looking for a CPU & driver for a Williams Stellar Wars, working.
Contact:
Chuck
voice: 401-871-5715
14 Teakwood Dr
Johnston, RI 02919
Posted: 11 March 2018
Wanted -- Nice Williams Getaway High Speed 2 Pinball
Let me know what you have.
Contact:
Dave Hofman
20137 E Silver Creek Lane
Queen Creek, AZ 85142
Posted: 7 March 2018
Wanted original 1956 Bally bingo score cards for Double Header or where to get them.
Contact:
Robert Honchark
Posted: 4 March 2018
Looking for ramp for 1987 Gottlieb Spring Break and plastics. If anyone has please contact me. Maybe a playfield.
Contact:
Raymond Niskey
voice: 502-693-3782
29502 Voyles Rd
Pekin, Indiana 47165
Posted: 3 March 2018
Paragon backglass WTD, Mirrored CPR version or NOS, must be Mint
Contact:
Kenneth White
voice: 650-400-0207
Burlingame, California 94010
Posted: 2 March 2018
GORGAR playfield wanted NOS.
Contact:
Ken White
voice: 650-400-0207
San Mateo, California 94401
Posted: 1 March 2018
NIGHT RIDER playfield wanted (NOS).
Contact:
Ken White
voice: 650-400-0207
San Mateo, California 94401
Posted: 1 March 2018
1939 EXS rotary merchandser, need back side wood panel, also starter button
Contact:
Robert Honchark
Posted: 26 February 2018
Looking for the left and right side to the backglass frame for a Gottlieb Score Board from 1956.
Contact:
Tony
Posted: 26 February 2018
1981 Gottlieb Black Hole Spinning Disc Motor and Brackets
Picked up a really nice BH, but I guess someone removed the entire spinning disc motor back assembly. The disc is still there, but someone mounted it directly to the backbox. So no motor or bracket it mounts to. Looking for as much as you may have. I don't necessarily need the motor since I can get a replacement, but I do need the bracket to mount it, but the entire assembly would be great.
Contact:
Greg Topf
River Edge, NJ 07661
Posted: 24 February 2018
I am interested in buying NOS playfield, playfield plastics, and backglass for Gottlieb ALOHA.
Contact:
C Winters
Posted: 20 February 2018
I would like your old "Sing Along" or "Atlantis" playfield that you replaced with a Wade Krause repro. Should be in decent condition, send pictures along with asking price.
Contact:
Frank
Beekman, New York
Posted: 19 February 2018
Gottlieb System 80B display MA644
Contact:
Kris
4651-197A Street
Langley, BC V3A5H7 Canada
Posted: 12 February 2018
Want a new set of plastics for your Gottlieb Pro Football Pinball Rescue will do it if they get enough people interested so email them and the quicker everyone does it the faster we get our sets !!!!!!!!
Contact:
C Winters
Posted: 8 February 2018
Looking for an excellent condition Bally Globetrotters backglass.
Contact:
Gary Cable
voice: 724 963 7210
PA 15425
Posted: 3 February 2018
Looking for a transformer for a 1986 Tic Tac Strike shuffle puck bowler. #5610-09563-00 must have this part number to match.
Please call ASAP.
Contact:
Scott Imhauser
voice: 847-346-4425
Algonquin, Illinois 60102
Posted: 3 February 2018
Please help. Looking for a replacement red ramp that is one of three ramps on the Williams Pinch Hitter. Have one or an idea who does?
Contact:
John Carey
voice: 904-612-1492
Posted: 3 February 2018
Gorgar playfield wanted, NOS, or real nice original
Contact:
Ken White
voice: 650-400-0207, fax: 650-400-0207
San Mateo, California 94010
Posted: 2 February 2018
Need a Gorgar apron or same era, also looking for NOS playfield for Gorgar, mint condition coin door, shell only is fine.
Contact:
Ken White
voice: 650-400-0207, fax: 650-400-0207
San Mateo, California 94010
Posted: 2 February 2018
Looking for a manual & schematic for a Bally Campus Queen.
Contact:
Steve
Streator, Illinois 61364
Posted: 1 February 2018
Williams, Pinch Hitter baseball. I need a couple of the red, plastic ball ramps. Part number 38-7062. Is anyone re-producing these? Any info will be greatly appreciated.
Contact:
Steve
Jacksonville, FL
Posted: 31 January 2018
Backglass for a United "Triple Play" bingo machine. Mine is fairly decent but I am looking to possibly upgrade to a better one.
Contact:
Marvin Giesting
Connersville, IN 47331
Posted: 30 January 2018
Looking for 1978 Playboy bumper caps NOS or good condition
and 1971 Drop a Card playfield plastics
Contact:
Elmer Harris
voice: 503-936-2530
Molalla, OR 97038
Posted: 30 January 2018
Wanted STERN pinball machines - All models from 1998 to present
Call or email.
Contact:
Michael
voice: 203-877-0348
145 Pepes Farm Rd
Milford, CT 06460-3671
Posted: 30 January 2018
WTB NOS or CPR Space Shuttle playfield
Will pay fair price
Contact:
Brian J
Posted: 29 January 2018
1989 Williams Earthshaker ramps for a players machine. Some cracks and flaws is fine.
Contact:
Mike Seeber
Posted: 28 January 2018
WTB: NOS Big Bang Bar Parts. Looking for original tube dancer in either color. Playfield or any original parts from Gene's remake or Capcom.
Contact:
Ben
Posted: 27 January 2018
Wanted:
NOS or good condition 1980 Gottlieb Circus backglass.
NOS 1980 Gottlieb Roller Disco backglass.
NOS 1980 Gottlieb Roller Disco playfield plastics.
NOS 1982 Gottlieb Caveman.
Contact:
Carlo
voice: 1-310-864-7628
Redondo Beach, CA 90277
Posted: 25 January 2018
1986 Road Kings playfield
must be usable and look respectful
Email info to nsobel@yahoo.com
Contact:
Norb Sobel
Bartlett, IL
Posted: 22 January 2018
Looking for a 1953 Marble Queen.
Let me know.
Contact:
Rick Gose
voice: 217-497-7091
Posted: 22 January 2018
Looking for a set of 31" wood legs for a Gottlieb woodrail
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 21 January 2018
I have 1948 Monterrey pinball game. Works great. 1965 bowling game works great plus a 1938 Lords of Boston player paino works great.
Contact:
Chuckie Garcia
voice: (978) 241-5111
18 Erickson St
Stoneham, Mass 02180
Posted: 20 January 2018
Wanted NOS Gorgar playfield
Contact:
Kenneth White
voice: 650-400-0207, fax: 650-400-0207
Burlingame, California 94010
Posted: 20 January 2018
Gottlieb wedgehead cabinet. I am in need of a wedgehead cabinet for a project game. I would prefer one with a coin door and metal parts. I would also like it to be near the Phoenix area to avoid shipping charges.
Contact:
Chris S
Tempe, AZ 85283
Posted: 19 January 2018
Looking for a good set of 31" wood legs for a Gottlieb woodrail.
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 18 January 2018
Looking for an original or Ron Webb reproduction backglass for Auto Race from 1956. Will consider anything.
Contact:
John P. Dayhuff
voice: 269-979-3836
Battle Creek, MI
Posted: 18 January 2018
DIRTY HARRY Stand Up Target or Targets. I need one or two black targets and one or two decals to go with it. This is just the black plastic piece with the white decal. 03-9119-7
Contact:
Mike
San Diego
Posted: 15 January 2018
Looking for a backglass for an Acapulco bingo pinball.
Contact:
Edward Przybylski
voice: 410-557-9621
3903 Skyline Court
Jarrettsville, MD 21084
Posted: 15 January 2018
I am looking for a new sturdier center (left) ramp for a Police Force Pinball. It is part #D-12786. IF you have one for sale please reach out to me.
Contact:
J
Posted: 14 January 2018
Looking for NOS, reproduction or mint original Mata Hari playfield. Want to stay within 400 miles of Quincy, IL.
Looking for manual, schematics and paperwork for Wizard and Capt. Fantastic
Contact:
Dennis
Posted: 12 January 2018
Looking for a 1949 Chicago Coin Football backglass.
If you have a nice one but can't sell it, maybe you can get a good scan for me to use to get a reproduction.
Contact:
Chris F
St Paul, MN
Posted: 11 January 2018
Need the solid green daisy pop bumper cap stamped "2 POINTS WHEN LIT"
for a 1953 Gottlieb "Poker Face" woodrail pinball machine. Ask for photo.
Contact:
Joe
Posted: 11 January 2018
Looking for a complete head or parts of a head for a 1971 Chicago Coin Hi Score Pool. I Have a complete body but no head.
Contact:
Brian
voice: 920 565-3021
Wisconsin
Posted: 10 January 2018
1956 Bally bingo backglass double header like NOS
Contact:
Robert Honchark
Posted: 8 January 2018
Looking for mountain mod for Getaway High Speed 2, Also looking for playfield for original High Speed.
Contact:
Ken White
voice: 650-400-0207, fax: 650-400-0207
San Mateo, California 94010
Posted: 8 January 2018
Need a coin plate 10 cent Williams part number 1b-2760-2.
Contact:
C Winters
Posted: 2 January 2018
I'm looking for an Eldorado playfield, Wade Krause reproduction, I can trade an Atlantis, Sky Jump, or cash.
Contact:
Ken White
voice: 650-400-0207, fax: 650-400-0207
San Mateo, California 94010
Posted: 1 January 2018
1950s HEATH CHUTES
I'm interested in 5, 10 & 25-cent denomination Heath chutes or similar 50s style drop chutes including the faceplates and the micro-switch attachments. If you're uncertain send me an email and I'll send you photos of what I'm looking for.
Gordo
Contact:
Gordon Hasse
3281 Bridgehampton Lane
Orlando, Florida 32812
Posted: 31 December 2017
1940s Scientific Machine Co. BATTING PRACTICE. Balls that batter hits and base for same. I am in need of the balls or any info on size or where to buy. Also any info an base or how to build same as I did not get base with unit.
Contact:
Lou Malin
voice: 585-671-1076, fax: 585-671-1076
812 Tinker Tavern Rd
Webster, NY 14580
Posted: 30 December 2017
Ball lift rods for Williams early 1960s machines. Must be NOS.
Contact:
C Winters
Posted: 26 December 2017
Looking for a ramp for a Data East Secret Service
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 22 December 2017
Need very clean or NOS color post red white green yellow 1 1/4 tall. These are from the 60s era.
Contact:
C Winters
Posted: 21 December 2017
Backglass for Williams Space Glider rifle game. Must send photos of front and back of glass.
Contact:
Ron Webb
voice: 732-232-9731
36 Seaton Road
Toms River, NJ 08755
Posted: 19 December 2017
I am looking for a decent playfield for a 1985 Bally Beat the Clock Pinball. Pictures of the playfield would be appreciated.
Contact:
J Church
Illinois
Posted: 17 December 2017
1992 Data East Star Wars speaker grills with Death Star graphic, original or reproductions wanted.
Also looking for the settings toggle switches for the same machine - green push/pull and white plunger switch that live to the left inside the coin door inside the coin door. Pretty sure this is the same mechanism across many DE machines, so if you have another DE machine decommissioned for parts (or know someone to point me to work one) send a pic.
Contact:
David Rowland
Jeffersonville, IN 47130
Posted: 15 December 2017
NOS playfield or best playfield for Williams Friendship '7'
Contact:
C Winters
Posted: 15 December 2017
NOS playfield plastics for Gottlieb Pro Football.
Contact:
C Winters
Posted: 15 December 2017
Want NOS backglass for Gottlieb Harmony.
Contact:
C Winters
Posted: 15 December 2017
I'm looking for Mousin Aound ramps, primarily the top/left ramp.
Also 1964 Bally Sky Divers plastics.
Contact:
Larry P
Corona, CA
Posted: 13 December 2017
Need a complete single chute Williams coin door 1960s era Friendship 7 unit. Price to be determined by quality of door.
Contact:
C Winters
Posted: 13 December 2017
Wanted--Bally City Slicker NOS playfield
Contact:
Ken White
voice: 650-400-0207, fax: 650-400-0207
San Mateo, California 94010
Posted: 9 December 2017
Looking for Stern "Stars" backglass.
Contact:
Steven Weinrieb
voice: 905-889-3987
77 Colvin Crescent
Thornhill, Ontario L4J2N7 Canada
Posted: 5 December 2017
1974 Williams Skylab Backglass in reasonable condition
Contact:
Steve
1303 E Hickory, St
Streator, Illinois 61364
Posted: 3 December 2017
1962 Williams Road Racer (driving game)--looking for following parts:
Toy Car
Steering wheel
Internal Scenery
Drum road assembly
Any internal parts
Contact:
Moe Mizrachi
voice: 408-431-5593
Posted: 29 November 2017
Wanted--backglass for Gottlieb Force II pinball machine, used or new.
Contact:
Chris
voice: 917-514-4685
5912 Chuck Wagon Lane
McKinney, Texas 75070
Posted: 24 November 2017
Looking for the spring torsion which comes with the Indy 500 target housing.
I can send a picture of it if necessary.
Contact:
Fred
Posted: 24 November 2017
Looking to buy a fully functional AS-2518-32 Bally sound board for my Six Million Dollar Man
Please send photos of front and back of board along with asking price including shipping to zip code 11746.
Contact:
Chris
Posted: 20 November 2017
This information is current as of November 18, 2018 4:42:02 MST
© Copyright Mr. Pinball 2018. All Rights Reserved.