Mr. Pinball Tip:

If you need to remove a playfield insert, use a hair dryer to warm up the area, softening the glue and tap from behind using a wrench socket or wooden dowel and hammer. Make sure the socket or dowel is just smaller than the diameter of the insert.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-6296 (voice and message), or (801) 277-0888 (message).
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2014. All Rights Reserved.