Removing cams from early Bally and most Gottlieb EM score motors can be
difficult. The main problem is that several massive switch stacks are
positioned such that they cannot easily by bent back to free the cam. One
relatively easy way to solve this is to remove one of the two screws from
each stack. Then loosen the remaining screw. This allows the stacks to
pivot out of the way, permitting easy removal of the cam.
New tips are welcome and encouraged. Tips will be credited to those who
contribute. If you would like to submit a tip click
For more information you may contact us by email, email form, or by phone at (801)
277-6296 (voice and message), or (801) 277-0888 (message).