Mr. Pinball Tip:

If your Williams EM chimes sound clunky because the dark foam rubber has decayed and fallen off, you can easily replace them using 5/16" old rubber rings. If you're in the midst of re-rubbering the machine, this is perfect timing. This is recycling old rubbers for yet another use. Be sure to place beneath and one above the tone bar on each end to completely isolate the bar. If the fit is too tight, chances are that you've still got some decayed rubber or a plastic washer in the way. Just toss them. You won't need them anymore.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-6296 (voice and message), or (801) 277-0888 (message).
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.