Mr. Pinball Tip:

A very useful tool is a socket-type screwdriver. It works well for removing cap nuts that have been over-tightened, and for tightening and removing playfield posts that have a hex nut top. A cordless or power type screwdriver works well, but caution should be used when using one. They tend to over-tighten and can cause wear to the threaded playfield wood.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-6296 (voice and message), or (801) 277-0888 (message).
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2014. All Rights Reserved.