Mr. Pinball Tip:

Electromechanical motor care and repair:

Clean exposed dirty gears and apply light machine oil. Do not oil the armature, or fiber or nylon gears. If the motor is damaged, you can get it replaced by contacting:
Multi Products Company, Inc.
5301 21st Street
Racine, WI 53406.
262-554-3711 fax

Give them the spec number stamped on the frame and they will make a new one. Or if you send the motor to them they will repair it. Be careful when looking for the spec number. Some motors have multiple spec numbers, one on each side, and only one of the numbers means anything to the Multi Products Company.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-0888.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2024. All Rights Reserved.