Mr. Pinball Tip:

Gas plasma displays, such as those used by Bally, Williams, and Stern can be tested without being mounted on a board by merely pressing the leads against another display currently under power. Do this very carefully! This technique can also be used to check display driver boards, if you have a known good display glass.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-6296 (voice and message), or (801) 277-0888 (message).
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2016. All Rights Reserved.