Mr. Pinball Tip:

When putting your game in storage be sure to cover it completely. There are many good reasons to do this.
If you are storing the game in an area where you are doing sheetrock work or carpentry, you must keep it completely covered to prevent dust from getting in the switches, motors, and playfield, which will cause switch failure, motor overheating, and playfield wear.
All openings must be covered to also keep critters such as mice and insects from building their homes inside, destroying, or gumming up mechanisms.
Cleaning up machine from these problems, after the fact, is very time consuming and expensive.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.