Mr. Pinball Tip:

A common problem with Williams early solid state machines is that the drop target switch wires break off at the solder joint. When you get one of these machines, lift the playfield and check the wires to make sure they are all connected. Be sure to check that the switch diodes are connected as well.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.