Williams and other em machines with large banks of relays such at Gulfstream
and Solids N' Stripes can have switches short out against the metal actuator
during reset. This will usually cause strange behavior, tripping other
relays and scoring unusual amounts of points. This can usually be solved by
loosening the screws that hold the affected switch stack and then tighten
the screws realigning the switch stack away from the actuator arm. You may
also need to slightly tweak the actuator arm slightly as well.
New tips are welcome and encouraged. Tips will be credited to those who
contribute. If you would like to submit a tip click
here.
For more information you may contact us by email, or by email form.
