Mr. Pinball Tip:

Having broken far too many bulbs in my fingers trying to remove them I took a new plunger tip and mounted it onto a piece of dowel(inverted so that the open end is up. Now by placing this plunger over the culprit bulb pushing down and twisting you can remove and install all those hard to get to bulbs without worrying if the darn thing is going to again break into pieces.

Peter Baluk

Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2021. All Rights Reserved.