Mr. Pinball Tip:

If your solid-state Bally, Williams, or Stern displays do not come on, look closely to see if any are slightly glowing along the bottom edge. If you have absolutely no glowing on all display this means that your display voltage is likely bad. This could mean a bad connector, blown fuse, or bad bridge rectifier.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2021. All Rights Reserved.