Mr. Pinball Tip:

On solid state machines, I often heard of using dollar bills, credit cards, quarter rolls, etc. to clean the fragile leaf switches of the solid state machines. Most of these fixes are temporary and unreliable for long term service. To clean blade contacts on solid state machines use an ordinary rubber eraser (usually found in discount stores for about .25), cut the eraser into about 2 inch long strips about 1/4 inch wide and 1/16 thick. These are approximate sizes, use what helps you best. Rubbing the contacts with the eraser will clean the contacts like new, a good long term fix.

Wayne Green
pinballr@AOL.com
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.