Mr. Pinball Tip:

If you have a place on any playfield that is worn, has dips etc. mylar will not stick, or curls at the ends after played awhile. What you can do to remedy this is to use AMRON. It is a clear coat. It also uses a hardener. The good thing about this stuff is it will not yellow, and conforms to any playfield condition. You can get it at any auto paint store. It is expensive. Ask for instructions on mixing, and try to spray on, but you can use a brush.

Jim Kearney
Jimisback@aol.com
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.