Mr. Pinball Tip:

You don't need to drill out the head lock on newer Williams/Bally games if you can just use remove the tamper-proof Torx screws. This can be done using either the correct torx tool or a pair of vise grips. Be careful with the vise grips as they will scratch the screws.

Brian Dust

Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-6296 (voice and message), or (801) 277-0888 (message).
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2016. All Rights Reserved.