Mr. Pinball Tip:

On my Funhouse and TMNT, I had broken ramp entrances which were causing problems during game play. Fed up, I decided to fix it by doing this: Went to a home improvement store and picked up some 'flash' sheets (~$0.23 for a 5"x7" square) and some 3M mounting tape. 'Flash' sheets is a really thin metal used along gutters and eaves. Using metal snips, I cut these 'flash' pieces into strips which mirror these sides and intake of the ramps. I used the mounting tape and stuck the 'flash' pieces to the sides of the ramps. I folded the edges of the 'flash' sheets to protect the pinballs. It's easy, it works, and it looks good.

Josh Wirth

Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2024. All Rights Reserved.