Mr. Pinball Tip:

Quick fix for screws that hold the playfield plastic posts and other metal posts that are prone to become loose from the constant hammering of the balls. The wood screw hole can be easily repaired. Insert a piece of old thin plastic insulated wire in the screw hole to depth. Then cut off the excess wire flush with the playfield with a wire cutter. Depending on the size of the hole you may have to insert 2-3 pieces. Replace the screw, it will tighten up like new wood. There is no mess and waiting associated with glues and etc.

Edwin Hawk

Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.