Mr. Pinball Tip:

The Goo Gone gel, which comes in a spray bottle works wonders. Spray on edges of mylar. Rub over the mylar seams. Let set for a few minutes, rub an edge with your finger and/or fingernail. Slowly, pull the mylar up with either hands or pliers. Slowly. continue to spray Goo Gone as mylar is lifting. Once it is up, continue to spray in small areas to remove remaining glue, which believe me there will be plenty of. Go to the following site for more precise instructions. http://pinball.flippers.info/mylarremoval.asp

Steven Fraley
stevenfraley@hotmail.com
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-6296 (voice and message), or (801) 277-0888 (message).
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2014. All Rights Reserved.