Mr. Pinball Tip:

Many games suffer from GI outages at some point in their life. Just because some of your GI goes dark, it doesn't always mean you need a board repair. Much of the time this is due to connector burn, often the Molex housings will disintegrate from high heat and burn. If this gets bad enough, it will cause board damage. Check all your Molex connections that power your GI, at first sight of burn, change that housing, also remove some backglass bulbs that you don't need, and get those 44 bulbs replaced with 47s, or better yet LEDs.

Scott Schill
Gums n Roses Vending
scottschill@comcast.net
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2017. All Rights Reserved.