Mr. Pinball Tip:

A broken blade switch can often be quickly repaired without soldering! Bend the old switch so that it breaks off at the outside edge of the switch stack assembly. Do NOT break off the soldered wire side. Disassemble the switch stack and insert a new replacement blade next to the old remaining part of the switch. Reassemble and you're done! The new piece is pressed against the old which is still connected such that no soldering is needed.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-0888.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2021. All Rights Reserved.