Mr. Pinball Tip:

Check your electromechanical's flipper bushings. These are a common reason for loose, weak, or floppy flippers. The flipper bushing is the white plastic piece attached to the underside of the playfield through which the flipper shaft rotates. It has been estimated that approximately 50% of all EM flipper bushings are broken. You can get extra-strong new flipper bushings from most suppliers. These stronger bushings have a flange (the usual broken part) that is 2mm thicker than the original.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2021. All Rights Reserved.