Mr. Pinball Tip:

If you need a leg bolt you can go to your local hardware store and pick up a 3/8-16 x 2-3/8" bolt (which will work), but it will probably have a flat 5/8" head. The original bolts have acorn heads--a rounded head. The flat heads tend to get nicks and burrs on them which will scratch you, snag your clothes, and even give you metal slivers. The acorn heads don't have this problem nearly as often. Acorn leg bolts are readily available from most suppliers.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-0888.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2024. All Rights Reserved.