Mr. Pinball Tip:

Many Bally bingos have a design that causes a tilt if the coin switch is activated too slowly. This is intended so that it will tilt when someone tries to cheat using a string or wire to activate the switch instead of a coin. This often is a problem in home use when you're not using coins and just tripping the switch with your finger. To deactivate this 'feature' bend the top switch piece on #4D of the Control Unit up so that the switch cannot close. #4D is the 4th switch stack from the left on the Control Unit.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-0888.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2021. All Rights Reserved.