Mr. Pinball Tip:

When replacing PC-mounted fuse clips, put a blown fuse in place after you mount the clips on the board, but BEFORE you solder them. That way, when you do solder the clips in place, they're properly aligned and won't place any stress on the fuse body. Be sure you use a blown fuse so you won't ruin a good one. Soldering too close to a good fuse can cause it to disconnect internally and you may not be able to tell by visual inspection that it's bad.

Steve Kulpa
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, email form, or by phone at (801) 277-0888.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2021. All Rights Reserved.