RC-1416
Features
|  | EIA RS-310C standard 19" rack mountable chassis.
| | Rugged all steel chassis suitable for industrial applications.
| | FCC class A and CE approved.
| | UL/CSA/VDE approved 300W power supply
| | Filtered cooling fan
| | Three shock buffered driver bay for 5.25" disk drivers.
| | One driver bay for 3.5" disk drive.
| | Front and rear pre-wired keyboard connector.
| | Lockable front panel
| | 14 slots ISA-bus backplane board
| | Power and Hard disk LED indicators
| | Cooling fan included.
|
|
Description
The RC-series chassis is an industrial grade rack-mount
chassis. It comes with an optional 14 slot passive backplane
and 300W power supply. The RC-series are FCC class A
certified and the power supplies are UL, CSA, and VDE approved
The RC-series chassis are intended for users that require rack
mounted solutions.
The power supply that comes with the RC-series chassis is a
300W (or 200W) power supply. This power has been approved by
UL/CSA/VDE. The power supply is 110V/220V switch selectable.
The switch is located in the rear of the chassis. The
following is the output of the power supply.
The RC-series include a variety of options such as split
backplanes mounted bearing slides. The RC-0016 does not a
include backplane board. It will accommodate 12, 14 slot ISA
bus or ISA/PCI bus backplane boards or a Baby-size mother
board. The RC-0016 chassis can also accommodate 8 or 12 or 14
slot or 6+8 slot backplane boards. The 6+8 slot backplane
board is a backplane board that has 14 slots for ISA bus
add-on card expansions. These 14 slots are divided into two
segments. The segment are totally isolated from each other
except for using the same power supply. The 6+8 slot is
designed for applications that need to use two computer
systems in one chassis.
|
|
There is a lock on the front panel. This lock will secure the
disk drive, reset switch, and the power on switch. This
provides the necessary security to prevent unauthorized
operation.
There are two fans in the chassis; one regular power supply
fan and one filtered-fan. The first fan is located on the
front panel. This fan will blow air into the chassis. A
filter is supplied to prevent dust from being blown into the
chassis. The second fan is the fan for the power supply. The
fan blows air from the chassis to outside.
Replacing air filter is simple. Just open the front panel
door and remove the air filter from the filter holder.
|
The RC-series chassis has 4 disk drive bays; three 5.25" drive
bays and one 3.5" drive.
The RC-series chassis is equipped 14 hold-down clamps for each
expansion slot. The hold-down clamp will secure the expansion
cards in the expansion slot to guard against vibration
There are two LEDs on the front panel; the power supply LED
and Hard disk LED. The power supply LED will illuminate when
the power is ON. The Hard diskette LED should be connected to
the hard disk controller. It will illuminate when the hard
disk is in operation.
|
RC-KB01
The RC-KB01 is an rack mount housing for a compact
keyboard. This drawer is sturdy and is equipped with a
lockable door panel. The slide mechanism ensures easy access
to the keyboard when it is extended. The drawer mounts
directly to a rack with four front screws and takes up a
minimal amount of rack space.
|
RC-KB02
The RC-KB02 is a 101 membrane keyboard that mounts directly to
a rack. This keyboard is surface water proof and dust
protected. The membrane key-switches offer sensitive yet
durable data entry and a beep sounds on every keystroke with
an on-board speaker.
This product is very useful in environments where users are
required to wear protective gloves or in areas where a
standard keyboard would be damaged.
|
