Features
|  | 386SX-40MHz CPU on board |
 | Up to 32MB DRAM |
 | Chipset:ALI-6117 |
 | Two RS-232C I/F & one Printer I/F |
 | One Floppy I/F & One IDE HDD I/F |
 | VGA LCD/CRT Controller |
 | One NE-2000 10Mbps Ethernet |
 | Support DiskOnChip flash disk chip |
 | Watch Dog Timer |
 | Built-in Keyboard and PS/2 Mouse interface |
 | Single 5V/1.7A operation |
|
Description
The JUKI-732E is a half-sized 386SX CPU card that run at 40MHz
and can have up to 32MB of DRAM. The card has 2 serial I/F,
one printer I/F, one IDE HDD, one FDD I/F, one PS/2 mouse I/F,
10MHz NE-2000 compatible Ethernet, an on-board Watch-Dog
timer, a Buzzer and a battery backed Real Time Clock.
The JUKI-732E has VGA on board, the VGA supports both CRT and
LCD panel and has up to 1024x768 resolution in CRT display
mode and 800x600 in LCD display mode.
The JUKI-732E is equipped with one 32-pin socket which
accommodates DiskOnChip, This allows the JUKI-732E to feature
a 2MB, 4MB ... up to 128MB virtual disk drive.
The JUKI-732E is equipped with a special designed 1K bit
EEPROM. Because the EEPROM is an nonvolatile memory, it can
be used in your application to store system I.D., password,
system configuration or other critical data.
|
Specifications
JUKI-732E
|
---|
CPU | 386SX-40MHz compatible (ALI-6117)
| RAM | Up to 32MB (Two 32 pin FPM/EDO memory)
| Chipset | ALI-6117
| BIOS | AMI or AWARD
| Multi-I/O Chip | Winbond W83877F
Two 16C550 RS-232C ports
One EPP/ECP parallel port
One Floppy I/F
One IDE I/F
Ethernet | Realtek RTL8019 chipset
10Mbps 16-bit Ethernet, NE2000 compatible
10BASE-T connector
LCD/CRT Controller | HM86508 with 1MB RAM
Support both CRT display and LCD Panel
1024 x 768 256 colors for CRT display
800 x 600 resolution for STN and TFT LCD Flat Panel
Flash Disk | Support DiskOnChipTMflash disk chip
| E2KeyTMFunction | A non volatile 1Kbit EEPROM is provided to retain critical data, like Password,System ID,¡Ketc.
| External Power Connector | 8-pin male connector (model: 2751-08TS)
| Watch-Dog Timer | Can be set by 1, 2, 10, 20, 110 or 220seconds period. RESET or NMI was generated when CPU did not periodically trigger the timer
| Interface | ISA Bus and PC/104 expansion bus on board
| Keyboard I/F | PS/2 keyboard connector
| Mouse I/F | PS/2 mouse I/F
| Power Supply | 5V/1.7A
| Operating Temperature | +0°C to +60°C
| Operating Humidity | 0 to 90% non-condensing
| | | |
|