Acqutek - XI-IM04
Home - Product Index - Contact & Ordering - Support - Calendar - Download - Y2K - Clearance
Similar / Related Products PI-IO48A - PA-CP12 - PA-ST12(-H) - PA-MA12(-H) - PA-MD12(16) - PA-AD12(-H) - PA-DA12(16)
XC-IO96 - XU-i088A
XI-PI08 - XI-IM04 - XO-RR08 - XO-SRD4/XO-SRA4 - ST-XD02 - ST-DM37 - IC-XCXD
XI-IM04
A/C D/C input Module Expansion board

The XI-IM04 is a 4-lines AC/DC input expansion module for the PI-IO48(A), XU-i088(A), XC-IO96, PA-CP12, PA-ST12(-H), PA-MA12(-H) or any other product which provides an XDI interface. This module is equipped with 4 input modules.

There are 4 on-board LEDs, one for each channel, which greatly facilitate real-time monitoring of control applications.

Model Number
    Model Number I/O Line Description
    XI-IM04-32 4 12-32V AC/DC input module
    XI-IM04-140 4 90-140V AC/DC input module
    XI-IM04-280 4 180-280V AC/DC input module

Block Diagram

Specifications
    XI-IM04-32 Input Module
    Input type IDC5
    Number of channels 4
    Channel status LED display
    Normal input signal voltage 12-32V DC or AC
    Input voltage range 12-32V DC or AC
    High signal immunity 12-32V Photo-Coupling ON
    3Vms Photo-Coupling OFF
    Response time 5ms maximum
    Input resistance 1.5K ohm
    Input to output isolation 2,500V rms
    XI-IM04-140 Input Module
    Input type IAC5
    Number of channels 4
    Channel status LED display
    Normal input signal voltage 120V DC or AC
    Input voltage range 90-140V DC or AC
    High signal immunity 90-140V Photo-Coupling ON
    45Vms Photo-Coupling OFF
    Response time 20ms maximum
    Input resistance 14K ohm
    Input to output isolation 2,500V rms
    XI-IM04-280 Input Module
    Input type IAC5A
    Number of channels 4
    Channel status LED display
    Normal input signal voltage 240V DC or AC
    Input voltage range 180-280V DC or AC
    High signal immunity 180-280V Photo-Coupling ON
    80Vms Photo-Coupling OFF
    Response time 20ms maximum
    Input resistance 44K ohm
    Input to output isolation 2,500V rms
    Screw terminal block
    Terminal type 14 AWG
    Contact voltage 10A / 300V
    Interface characteristics
    Interface type XDI
    Output signals LSTTL
    Connector XDI - 20 pin DIL male box header
    Cable Length 60 cm (2 feet)
    Power requirement +5V DC
    Power consumption 120mA
    Physical/Environmental
    Dimensions 12.0 (L) x 12.0 (W) x 2.5 (H) cm
    Weight 90 gm
    Operating temperature range +5 ° C to +50 ° C
    Storage temperature range -25 ° C to +85 ° C
    Operation humidity range 0 to 90% non-condensing
    Storage humidity range 0 to 90% non-condensing
Copyright © 1996 - 2005 by Acqutek Inc.