Acqutek - XO-RR08


Home - Product Index - Contact & Ordering - Support - Calendar - Download - Y2K - Clearance

Similar / Related Products

PI-IO48A - PA-CP12 - PA-ST12(-H) - PA-MA12(-H) - PA-MD12(16) - PA-AD12(-H) - PA-DA12(16)
XC-IO96 - XU-i088A
XI-PI08 - XI-IM04 - XO-RR08 - XO-SRD4/XO-SRA4 - ST-XD02 - ST-DM37 - IC-XCXD


XO-RR08
Reed Relay O/P Expansion board

The XO-RR08 is an 8-lines Reed-Relay output expansion module for the PI-IO48(A), XU-i088(A), XC-IO96, PA-CP12, PA-ST12(-H), PA-MA12(-H) or any other product which provides an XDI interface. This module is equipped with eight 10VA Reed-Relay outputs.

There are 8 on-board LEDs, one for each channel, which greatly facilitate real-time monitoring of control applications.

Model Number

Model Number	I/O Line	Description
XO-RR08	8	10VA reed relay

Block Diagram

Specifications

Photo-Coupled Input
Reed relay type	1A05
Number of channels	8
Channel status	LED display
Power	10VA
Switching voltage	200VDC Maximum
Switching current	0.5mA Maximum
Carry current	1.0A Maximum
Life expectancy	10^8 (signal level)
Contact resistance	100 ohm maximum initial
Insulation resistance	10^11 ohm minimum
Operate time	0.5m second maximum
Bounce time	0.5m second maximum
Release time	0.2m second maximum
Vibration	20g (10-2,000Hz)
Shock	30g (11ms. 1/2 sine wave)
Resonant frequency	3.5KHz
Screw terminal block
Terminal type	14 AWG
Contact voltage	10A / 300V
Interface characteristics
Interface type	XDI
Input signals	LSTTL
Connector	XDI - 20 pin DIL male box header
Cable Length	60 cm (2 feet)
Power requirement	+5V DC
Power consumption	200mA
Physical/Environmental
Dimensions	12.0 (L) x 12.0 (W) x 2.5 (H) cm
Weight	90 gm
Operating temperature range	+5 ° C to +50 ° C
Storage temperature range	-25 ° C to +85 ° C
Operation humidity range	0 to 90% non-condensing
Storage humidity range	0 to 90% non-condensing